STARTUPBIZHUB

“Manufacturing Business Process”
Comment Page 2

  • Rathish kumar said on November 23, 2011
    sir, I would like to start a small business like manufacturing curry powders and sell to my local area. Pls guide me how to start and market my product on a profitable way. I want to start interior sides of kerala state.
  • Aditya said on November 24, 2011
    Hello All, Our Company basically deals in IT & FMCG sector. We are 2006 established & pune based company. Currently we are looking for Channel partners in PAN India. Low investment & high profit margin. If you are interested kindly mail your details at availdistribution@gmail.com. Thanks Regards Aaditya
  • SELVAM said on November 25, 2011
    hello i am an engineering student in mechanical .i am interested to start steel door fire rated product so please guide me partner are welcome my email; selvamcbe1984@gmail.com ..
  • narinder singh bhamra said on November 25, 2011
    i want to start a small business in Mumbai in packing industries & i having a space of 200 sqft pls suggest some ideas
  • arunabha chaudhuri said on November 26, 2011
    hi everyone i am an electrical engineer with 5 years exp in similar field , i want to setup a small food prosseing unit where dairy products will manufacture like butter,icecream,jam jelly,ghee,cheese etc .kindly advise what will be approx investment & what will be the rull and regulation for this . pls mail me at arunabhaee@gmail.com or 9831121736
  • vilas mirgal said on November 27, 2011
    hi, i want start my business in mumbai in engineering works like lath machines kindly give me contacts of companies they provide me work...
  • Piyush Garg said on November 29, 2011
    hello, I am piyush from Delhi. I want to start a small manufacturing business with capital of 5-10lacs. please advise what product I can go with?
  • vijayakumar said on December 1, 2011
    Hi, I like to start one new sole trader business in chennai please advice for what business will get more profit thanks
  • mandar kulkarni said on December 3, 2011
    i have started a new machine shop of lathe machine milling machine and other i am great need of jobs works so please guide me .
  • Shaunak said on December 5, 2011
    Hello,I am mechanical engineer,I want to start solar water heater,solar panel etc production units near Patan(Gujarat). Also inform that there are many solar projects running near patan, So it is very useful.So please advise how to start my business?
  • sagarika said on December 5, 2011
    i want to start a small business with 1 lakh investment in bhubaneswar, orissa.
  • Raghunath expert adviser said on December 6, 2011

    @sagarika, what kind of return you are looking for your investment?

    Raghunath Natarajan
    Startup Biz Hub - Advisor (Staff)

  • Venkat Raman said on December 7, 2011
    hi dear, i am from India and working in Dubai. I would like to import food stuffs( fruits,vegetables & spicy items) from India. Regards this if you would give me some suggestions, really it would be appreciated. Regards Venkat Raman
  • Dipankar Dasgupta said on December 11, 2011
    I want to start retailing of tea in small packets of 100/200/250/400/500/750/1000gms in hyderabad, India by getting Tea from Kolkata and Gauhati. What licenses/permits are required to establish a small packaging unit (from home or otherwise)?
  • RAHUL PAREKH said on December 13, 2011
    i want to start my business of pickle industries in Nadiad, kheda district, gujarat and to export it.how i can start and which type of machinery and how many investment will require?
  • amit kumar sarkar said on December 19, 2011
    i want to know about manufacturer disposable paper cup details and i want to get project report for that.
  • Fazalul Rahman said on December 20, 2011
    i want to start a new business in united arab emirates i have experience in g.i. profile manufacturing and sale will get good profit can you partner to start thanks contact)?
  • k.l.kumar said on December 23, 2011
    i would like start spices processing plant with 10tpd. o, plz advice me in marketing and initiation cost and also maintenance cost per month
  • suhel said on December 25, 2011
    i would like to start distribution supplier of tablet or surgical product.. But i haven't idea about how i enter in this field & what budget to be need for this.
  • Vikas said on December 27, 2011
    I am interested to start a small CS, AS and SS Pipe Fittings manufacturing unit in between kalyan and Badlapur, interested investor welcome. Thank you.
  • Dalsingar Yadav said on December 31, 2011
    I want to start making wheat flour and packing in 5kg, 10kg poly packets and supply to big stores. what are the legal and tax issues i have to take care of. what about registration and with whom? I want to start in azamgarh. My firm will be proprietary firm. I want to set my unit in Azamgarh (UP) and name will be sumimu group of agro products ltd.
  • M.K.Roy said on January 2, 2012
    Hai. Basically I have done my diploma in Electrical and Electronics Engineering and I have a 8 yrs of experience in Manufacturing of control instruments like timers, counters, energy meters. Apart from this I have an experience in Supply Chain Management and Marketing (Sales). I am residing in Bangalore, Karnataka, Bangalore. Now I wanted to start my own business. Can you suggest me. I have the plans to start Mfg of Control Panels and Security Systems. Kindly suggest.
  • faizal said on January 5, 2012
    Dear Sir, I want start Roto Molded water tank Manufacturing Industries In Tamil Nadu Kanyakumari , Pls provide me the details Like How much Capital Need. Thanks and regards Faizal
  • vishal c mhatre said on January 5, 2012
    I am an Electronics Engineer.... I would like to start an industry in in electronics field in new mumbai... Give me some suggestions...
  • vinod said on January 8, 2012
    Hai, This is vinod from india. I completed engineering in the stream of electronics and communication . I am planning to build a manufacturing industry based on electronic components only., So please suggest me anything.
  • NOUSHAD MK said on January 10, 2012
    hello..I AM IN INDIA-KERALA-WAYANAD.I LIKE TO START A WOODEN BASED INDUSTRY WITH MODERN TECHNOLOGY CNC MACHINES AT WAYANAD(DT). OUR DISTRICT IS VERY SUITABLE FOR ANY BODY IN THE WORLD BECAUSE THE TEMPERATURE IS 22 TO 27 CELSIUS. I AM LOOKING A PARTNER WITH CNC WOODWORKING. EXPERIENCE AND I CAN INVEST EQUALLY. WHILE THE FIELD IS MOST HIKING AND HUGE PROFITABLE .IF YOU ARE INTERESTED MAIL ME SOON nmksby@gmail.com mob +91 9447434666
  • Akmal Abdiyev said on January 11, 2012
    I am from uzbekistan. I am very interested in solar water heating systems. It really suits to my country as there are 300 sunny days a year average. I do need to find out how to set up this business in uzbekistan. Or is it possible to maintain contact with already established companies and invite them to help to set up this business in uzbekistan. I am sure it will become very profitable business
  • Joel said on January 17, 2012
    I am interested in open a juice factory (mango juice, orange juice, guava juice..etc) on small scale. I want to know where can I buy such juice processing machines for small scale business in India. I want to know if there's any small scale business that is making juice in New Delhi/Delhi or else where in India where i can familiarize my self with the daily activities involved in juice making. I am also interested in partnership. Any one willing to help me email me: kandeshi2011@gmail.com
  • V. Krishnakumar said on January 19, 2012
    Sir, I am a Plastic processing technician, and having 15 years experience in syringe plant. we have a team to set up and take production of syringes and allied products. we want to start a production plant in south India if any investor is interested kindly contact us. thanks& greetings.
  • salvin said on January 24, 2012
    I have 3 acres of land with Electricity, Water and Shed. I like to start food & spice processing and packing unit in it. Persons with experience and interest in this field are invited for partnership. You can mail me at landxport@gmail.com
  • shikhar srivastava said on February 4, 2012
    hello, i am a mechanical engg. student, living in lucknow, UP and is willing to start my own business in the near future after gathering sufficient capital and funds. From parental front, i am with like zero capital backup. I want to start a business in production of products related to nano technology, automobile spare parts, and, other mechanical products. Maybe production of plastic products also. capital and funds is a big issue for me. I want solutions for capital problem and also advice that starting above mentioned business which require huge investments possible for me...??? or i have to start with some other products with low production cost..??? i will be highly pleased after getting your sincere advice. thank you.
  • poonam Samdariya 10-2-12 said on February 9, 2012
    hello, sir i am masters in agriculture Ext.Edu), living in jabalpur (M.P.) i am working with N.G.O. i want to start hand crafted materials with village women's for their empowerment and livelihood. i want to know where can i sell these product and what type of product we prepared? so please suggest me some products and market, agencies. you can mail me at my email.
  • divya said on February 20, 2012
    hello sir,i am masters in economics i want to start export business in madurai what product is suitable for this place and how to get the business export license pls give some suggestions about export business. you can mail me at my email. thank u
  • chandan nayak said on February 22, 2012
    i have a big land for a electrical & electronics company construction but i don't have enough money for a big company.So how can i start it from a small ?
  • r.ravi said on February 22, 2012
    Hi i am Ravi i started a fabrication company like s.s ,m.s & brass fabrications & i worked for some companies so any one want a work with the fabrication side please contact me
  • Sonam said on February 23, 2012
    I am planning to start disposable syringe manufacturing in Bhutan. Please advise me from where I will get the machine and the plastic palates.
  • Sahil Jindal said on February 27, 2012
    Sir I am Industrial Engineer (BE-MBA). My father is in manufacturing business of round tin containers in ludhiana Punjab. I want to expand my business not in local markets but globally. I want to enter into exporting of my products but i did not know how I can deal with this. Also I want to spent 10- 15 lakhs more into my business so that it can expand well. Please suggest me something.
  • T.K.SINGARAVELAN said on February 28, 2012
    Hi we have a manufacturing unit of coonling towers in coimbatore Tamilnadu.We want export our products to other countries.But we don't know how to do this any person suggest and share with me.with best regards.
  • Rishikesh Shukla said on February 28, 2012
    Sir, I have passed BBA last year. I am a resident of Sitapur (a small town of Uttar Pradesh), India. I want to establish a puffs production plant, which are too much eaten by the children of villages and towns. so , please give me the full information like rules provided by Indian Government etc. Thank You
  • j r anand jain said on February 28, 2012
    hi guys i want to start a auto parts manufacturing unit in tamilnadu kindly advice what is the procedure and which component will good
  • Tintu Tomy said on March 8, 2012
    I am a mechanical engg(fresher). My father has owned a workshop and I like to start a manufacturing unit.Can u please help me which manufacturing units is more profitable, how to start and how to get clients.
  • Amit Garg said on March 11, 2012
    Dear Sir, I'am based at Mumbai. Want to start a garment manufacturing unit.Can you suggest how much is the minimum investment. Please also suggest which other manufacturing business is profitable at Mumbai with an investment of around 20-30 Lakhs.
  • nirav patel said on March 30, 2012
    now i will think a new small chemical business. but i have no idea . i have optional business in casting iron powder .please given me a idea about this business.
  • pradeep singh said on May 13, 2012
    I am a mechanical engineer currently working as a production cum quality engineer in small company in my home town ghaziabad. I want to start my own Business in my field my father is also having his own business having a small machine shop and do job work for some companies please give me some Idea to increase that particular business or suggest me some other ideas to do some other business.
  • Amol Kudache said on May 19, 2012
    I am an Electrical & Electronics engineer, having enough experiance of industrial plant maintenance, i want to utylise my knowledge and make some money, my interest is in manufacturing electrical or electronics components, I want to start such type of small scale industry or company at Belgaum, Karmataka. So please guide me for the same.
  • Voon Voo Tzin said on May 20, 2012
    I am a Mechatronic engg I have manufacturing experience and I like to start a small manufacturing unit. I am thinking of paper manufacturing , how to start and how to get clients. Regards Voo Tzin
  • GOPAL GANGWAR said on May 23, 2012
    I AM AN ACCOUNTANT IN A SUGAR MILL FROM 15 YEARS. BUT NOW I WANT TO START A MANUFACTURING BUSINESS WITH 5 LAC IN RAMPUR,UP,INDIA PL.GUIDE ME FOR THE SAME.
  • Sreeraj said on June 23, 2012
    I am a Government employee looking to have an additional income and a small business for my wife which I can develop into a real good one with years of dedication and hard work. Can u please tell me some Ideal business opportunities in and around Thiruvananthapuram?
  • amit kumar sarkar said on July 14, 2012
    i want a business of disposable paper cup manufacturing unit. but i have no idea about its. please send me a project report about manufacturing unit of current valuation. i am grateful for it.
  • hasmukh patel said on July 29, 2012
    hello sir, i am ex Indian Army per's i want to start manufacturing business in surendra nagar(gujarat) what product is suitable for this place and how to get the business start & license pls give some suggestions about new business. you can mail me at my email. thank u
  • Sachin Singh said on August 7, 2012
    Myself sachin prakash singh. I did Msc, working in bank. I want to start a business in 100000-150000 in gurgaon. Plz help me.
  • kishore patidar said on August 8, 2012
    we want to start particle board ind. at RAIPUR. We want to some information about ind. we want to know how much land reqd. for that type of ind. and how much Total Capital Investments are reqd. for PARTICLE BOARD INDUSTRIES. we want to also know this projects are viable are not at RAIPUR C.G. KINDLY REPLY URGENTLY SIR, THANKING U
  • Vijay anton said on August 16, 2012
    I had completed my Applied Electronics in 2011. At present i am working in IT industry. I would like to start a business relate to Electronics industry. Please Give me some suggestion. I am from Tiruchirappalli, Tamilnadu, India
  • Rajendra said on September 3, 2012
    hello sir namaste! i would to like to start my own business investing around 7/8 lakhs. please give me some ideas
  • bala said on September 7, 2012
    I am planning to start a small scale manufacturing business in Pondicherry or nearby. My initial investment will be around 10 lakhs. I am an engineer with 8 years of experience in automation. If somebody has good ideas about Eco friendly products or Electronics based manufacturing industries please guide me. Thanks Bala
  • laxman said on September 9, 2012
    i am laxman working as a chemical process engineer at Gharda Chemicals Ltd. Wanna start up with my own business in my native place, so kindly help me.. i can invest up to 40-50 lacks. My Place is Belgaum-Karnataka-India
  • tahir said on September 11, 2012
    mumbai; india. i am mechanical engineer. i have experience in machine design. please suggest some business ideas
  • k.kanagaraj said on September 23, 2012
    I am hard working and through known the area of south Indian chemical market around 20 years experience. I want the agency/distribution work commission bases or salary based in chemical field. I well know the all chemical technical aspect and chemical formulation work for in chemical industry. thanking you
  • saheli chakrabarty said on November 7, 2012
    hello sir.. i did my m.ba in marketing and have few months job experience. i want to establish a business as a manufacturer of hardware nails in mumbai and have a capital of 5-7 lacs.. plz guide me for further steps required to be taken,. thank you
  • Tushar Kanti Kirtunia said on November 16, 2012
    Hi, could you please give me any small scale business idea. Dhaka Bangladesh
  • jojo george said on January 22, 2013
    I am Planing to start coconut chips manufacturing business in kerala , and planing to marketing in all over india. after 1 year i am planing to export to abroad, please suggest me how can get all license to start the business. the item will be around 40grams packet. All the manufacturing process done through machine only. jojo George, Kannur, Kerala, 670632, 09650568121
  • Prashant Agarwal said on February 14, 2013
    Hi, I am from Jamshedpur, Jharkhand. I wanted to know if pvc pipe manufacturing would be a good business in my state. Can you please suggest me with a decent manufacturing business in my state. My number 9546031261
  • Annie Udofa said on February 17, 2013
    I want to start a tomato paste manufacturing cottage industry in the southern region of Nigeria to empower poor women to gain employment and achieve economic self sufficiency. Can you provide a detail process, please. Women there are also interested in bar, liquid and powered soap making. Thank you for assistance with these processes.
  • gayathri said on March 9, 2013
    we are in rajampet it is between kadapa and kodur. i want to do board with sugarcane waste pls send details about this manufacturing unit.
  • vinod sharma said on March 16, 2013
    Dear Team, I want to start a processing unit for automobile parts at Bhiwadi, Rajasthan. My approaximate estimate is 3-4 lacs. Please suggest that what else I need to prepare for and which automobile part processing will be suitable for initial phase of starting business. Regards
  • mandeepbhandari said on April 10, 2013
    Want to start frozen peas processing small scale plant near about 2000 kg per day production capacity in starting. i live in shimla himachal pradesh.
  • ganeshvel said on April 14, 2013
    want to start a new business in pondicherry and give some more ideas for small scale industries of mechanical & others. this is my email id; vel86ganesh@gmail.com. cell no ; 9659988813
  • Sonali Deshmukh said on April 24, 2013
    Dear sir, I am an electronics engineer and working in an IT field. I want to set a small scale business upto 1 lakh in dombivali, maharashtra. Please suggest me something.
  • smriti bhatnagar said on May 3, 2013
    I want to set up a small scale business for nails and screws in bangalore please suggest me something
  • kailash pawar said on May 10, 2013
    hello sir, I want to open green net. and green carpet production please guidance me. thanks
  • KAWALPRIT said on May 13, 2013
    hello sir i am living in faridabad. i am a mechanical engg with 5 years experience in Quality Assurance in yamaha industry. Now i want to open my own business. kindly guide me which business i can start with less expensive.
  • Raj Kumar Kori said on May 19, 2013
    I am a banker by profession, now i want to start a business in jabalpur with amt 5 lac.pl give me idea which type of business i can start.
  • kunal said on May 23, 2013
    Hello I am from delhi I want to open leather tannery for exporting semi finished product . What will be the minimum capital investment and the best place to start the business . And plz tell me is this a good idea because I have little idea of it.
  • ramakrishna pemmadi said on May 28, 2013
    i am from andhrapradesh from kakinada, i want to start a business with amt between 5 to 10 lacs ,is it possible to start syringe making business, how to do, whom can approach and over budget cost, can you please help on this.
  • avinash said on May 30, 2013
    i am 34 yrs of age from goa india my family doing home production of coconut oil taking of coconut so i want to make these into big business so i want to get manufacturing license so pls tell me how to these so i send sample of oil to govt off. pls guide me step by step
  • krupabdhi said on June 1, 2013
    Hi, I am an electronics and comm. student and i want to start a small scale electronics equipment supply business to other industries as it has passed nearly 4 years i completed my studies i have not much knowledge so kindly help me out
  • Touheed Alam said on June 15, 2013
    sir, I am from kishanganj, bihar. I wanted to start registers, notebooks, etc small manufacturing factory. would be a good business in my state branch city. my district population presently 25 lac's and still no notebook factory is there. Can you please suggest me with a decent manufacturing business in my small city. please suggest me What will be the minimum capital investment. land already there.
  • Rajan said on June 18, 2013
    sir i am Rajan.... i am working to interior designer, showcase work, modular kitchen, bedroom windows, door all alteration works etc... u plz contact my number 9894205544, 8608588161... email id: rajanv25@gmail.com... thank u
  • Dheeraj Lavania said on June 22, 2013
    I am a mechanical engineer want to setup manufacturing plant in agra so plz give me some ideas.I can invest upto 5-10 lacs.
  • saraswat behera said on June 28, 2013
    I want to setup manufacturing plant in orissa so plz give me some idea. I can invest upto 30 lacs
  • D mishra said on July 8, 2013
    Dear sir, I am marine engineer and now want to quit sea and start my own business in electrical, electronic or mechanical field of manufacturing.I can invest upto 15 lakh INR in mumbai,india. please advice how to start and from where I will get machine and distributor of that product and that product should be recession proff. thanking you in advance.
  • mahaprasad tripathy said on July 15, 2013
    sir I am a mechanical engineer. I want to set up a small scale industry in mechanical field ,i can invest 10-15 lakh INR in odisha,INDIA Please give me any decent suggestion to set up my business
  • pradeep kumar said on July 15, 2013
    sir.I am b-tech(manufacturing engg) final yr student. i want to set up a small scale industry after the completion of my degree. I can invest 50 lakh INR in jharkhand. I am interested in mechanical and metallurgy field .plz give ideas.thanking you in advance.
  • jayaprabha said on July 24, 2013
    I am interested to start a small scale industry which can be run by a mechanical engineer. I can invest 10lacs on this. I am a post graduate with m.sc maths m.tech,cse aged 37years. plz mention the available prospects and business proposal
  • Laxmi Narasimha Raju S said on July 31, 2013
    I am in trading business for almost 15 Yrs now, I would like to start a manufacturing industry of solar products as i have surveyed this industry has future for next 10-15 yrs. I have a investment capacity of 30 Lacks, kindly suggest. Raju
  • Patel Archit said on August 3, 2013
    sir, I am mechanical engineer with 2 yrs experience in industry. now i want to start my own company and i have 10,000 sq. feet .land plot. so give me some advice about cost. How much money is enough for my business?
  • Abhinav Rathi said on August 16, 2013
    Dear, sir I am from Madanganj-Kishangarh ,Distt.-Ajmer,State-Rajasthan. I want to start new business with capital Re.600000/-. I want to ask with u which kind of business in this capital I started , Sir pls rly as soon as possible.
  • B. Krishna said on September 12, 2013
    I want to start a production unit of note book in Kolkata. Please suggest me the procedure to start it and also the investment required for the same. Thank You & Regards B.K.
  • VISHESH said on September 20, 2013
    I'M a manufacturing engg student I want to start a industry related to my field in ranchi .I can invest 5 lakhs . will a nail making industry good for me.
  • Tejaswi said on October 9, 2013
    Bangalore,small production sector with less cost.
  • VIJAI BHASKAR expert adviser said on October 14, 2013

    @gayathri, Why do you want to use sugarcane bagasse ? The project involves atleast 10 CRORE. What are the products you want to make ? If i have some clarity i can advise.

    vijaibhaskar@gmail.com || Plastic Manufacturing Consultant

  • VIJAI BHASKAR expert adviser said on October 14, 2013

    @Prashant Agarwal, Have you decided which project is worth pursuing? Let me know the status ? I can suggest you some ? regards vijaibhaskar@gmail.com, 081211-85183 VIJAI BHASKAR

    vijaibhaskar@gmail.com || Plastic Manufacturing Consultant

  • VIJAI BHASKAR expert adviser said on October 14, 2013

    @saraswat behera, Did you decide ? Let me know ? I can suggest  a few.

    vijaibhaskar@gmail.com || Plastic Manufacturing Consultant

  • sahil saharan said on November 5, 2013
    sir, i want to start small scale product manufacturing business, so please guide me investment under 15 lakhs
  • satyawan singh said on November 6, 2013
    hi, i want to start spices process plant s a small scale..... plz give me knowledge about this business anyone...
  • harde manoj said on December 1, 2013
    hello sir, i am in last year mech engg. After completing degree i want to start my own business plz suggest the best business opportunities . upto capital 15 lakh plz....
  • suresh said on December 11, 2013
    Dear sir i shell start small industry with 3axis milling machine i need plastic pressure die casting moulds present please guide me where i get like this work. And also i am interested to make own product and marketing i can invest up to 10 lakhs please suggest me for better product
  • Balakumar.s said on December 26, 2013
    i am an engineering graduate and want to start small scale industry...plz anyone suggest me to do profitable one
  • pritam mohanty said on January 6, 2014
    sir. i completed mechanical engg. recently.i have no experience in business. But i am so interested to start a small industry in odisha. so plz suggest me what type of industry i ll do?
  • Dharit Patel said on January 20, 2014
    i am an Instrumentation and Control Engineer. i am from Rajkot (Gujarat). i want to start business in Rajkot. give me advice what is best for me to manufacture in rajkot. i can manage around 15 lacs.

Your Comment

(All the above fields are required.)

Categories

Popular Articles

Join Our Newsletter