STARTUPBIZHUB

“How to Start a Scrap Metal Business”
Comment Page 5

  • sagar said on May 2, 2012
    i want to export scrap from toronto to india . so can u guide me to start business
  • Sachin said on May 5, 2012
    Sourcing Agent for metal scrap operating from UK, have contracts & regular buyers in India, looking for sources from Canada & USA. Please email me rsachith68@gmail.com or call +44 7878748196. Serious importers, furnaces, mill owners in India also can contact.
  • Mandeep S. Mallick said on May 22, 2012
    Dear Sir, We are looking forward to open a Scrap metal business from Goa. We have network of scrap buyers and furnace factories owners please let us know how do we go about as we want to become Agents/ Mediators .
  • Mauricio Estrella said on May 22, 2012
    I live in Tijuana, Baja, mexico, and I want to start a scrap metal business, but my idea is to buy here in Tijuana and export metal to USA and sale to some Company located near to SD or LA in California, Please give an idea about how may contact interested Companies in California to do this Business. Thanks in advance for your help. Sincerely Mauricio Estrella
  • mohan b said on May 23, 2012
    i would like to metal scrap business in india mainly to do with Indian army and other govt and public sector companies like vssc isro etc
  • Lorrie Finkel beginner adviser said on May 24, 2012
    @Mauricio Estrella, I am not sure I understand your question. What kind of scrap do you want to export? What kind of a company do you want here with scrap. I am not sure if you understand Buying the metals in Mexico might be less money and I am not sure how much You want to bring here to the Bay area. Are these non ferrous metals ,are they Clean or dirty metals ? Maybe you pay a lot less in Mexico and then you could Arrange to sell direct to the dealers .This way they can strip the copper wire or sort and clean them to fill their sales. That is your best option because today Operating a scrap company on an industrial lot is not well liked by the non profit Clean air people and water compliance .The leases and the insurance and Equipment is going to cost. Find a middle broker here to go the yards and make All of the arrangements. Some of the non ferrous metal scrap dealers Should be In the yellow pages. Here are a few.They will non ferrous and scrap.
    Circosta metals - San Fransisco
    Alco Iron and metal -San leanfro and Mayer island
    Action metals - Richmond
    Standard metals -Oakland
    Schnitzer metals -Oakland
    Lakeside Recycling -Oakland
    Good luck .

    Lorrie.finkel@gmail.com || Scrap Metal Business Consultant

  • daniel said on May 25, 2012
    I want to start scrap metal business in prince edward county VA and want to know about county ir states permits prince or What I need to open for metal(copper, wire, brass, aluminum, and car converters).
  • johny said on May 30, 2012
    hi i am starting a new business of scrap material export to india from europe i am collecting knowledge if u can help
  • imran said on July 25, 2012
    HI I AM FROM CANADA AND CITIZEN. IF U NEED HELP FROM ME TO EXPORTS ANY KIND OF METALS OR SCRAP LET ME KNOW. WE CAN EXPORT ANYWHERE IN THE WORLD.
  • BJEES said on July 27, 2012
    I was wondering, do you need a license to start a scrapyard? .... I just wonder if it's possible that I buy scrap metals from metal recycling center then trade it. ... small town is Loubos, Northern Cape, south africa, with a small budget R5000.00 tell me how ....
  • Brett Moore said on July 29, 2012
    Hello BJEES, i think am better placed to help you out. So if interested, then do contact me so that we can proceed. bbrettmoore@yahoo.com
  • sidheekh said on July 29, 2012
    hi, I am living in uk and i planing to export scrap metal and plastic from uk to india. can you please advise me from where i want to start and how can i make success on this business.
  • suresh thyagaraj said on July 30, 2012
    am from india, bangalore, have worked for scrap dealers for the last 15 years. willing to work for someone who wants to start a business in south india or to work for an importer in selecting and loading his material from abroad.sakthisuresha@yahoo.co.in
  • nirmal vj said on August 3, 2012
    hai sir, i'm a student..i discontinued my studies now i'm planing to start a scrap business. i want to do in chennai, india. can you plz give some ideas. can u tell me how much money i have to invest and what all are the requirement to become good businessman. i want to do business in stainless steels. plz help me with ur ideas..thanku
  • M.Mumyaz Qureshi said on August 7, 2012
    sir, i m interested to start a steel scrap business from saodiarebia to India in Indore(M.P.)so, plz. guide us com pleat information regarding license and other official formalities. Thanks!
  • Praveen Aggarwal said on August 9, 2012
    I would like to know how to start the iron scrap business? how to buy scraps in minimum cost ? What are categories of iron scraps ? where we sold the collected scraps from where we get high prices ? Special tips for this business ? Plz. help us. Regards, Praveen Aggarwal
  • ani said on August 10, 2012
    Hello sir, I'm really excited to have my own business. After all I decided to run my business at metal scarp yard in mississauga-canada ontario. could you pls send me detail about it and how can I start it? do I need to get license and business certificate or what ever I need. thank u so much, ani
  • shaheen said on August 12, 2012
    Dear Sir, I want to start Scrap Business please anyone can tell how i can do this business?
  • Tejinder singh said on August 14, 2012
    HI..i am indian doing metals scrap business from russia..we have huge quantity of HMS1 and HMS1/2 available for export from russia...we can act as agents for buyers . Prices are very less and we can arrange inspection of material before shipment also. we are already doing for indian buyers who can work on l/c basis. contact us on gtbts@hotmail.com with details u need.
  • sthembiso said on August 15, 2012
    i need a partner in my scrap metal business in south africa. please phone me at 0724631630
  • iggy said on August 16, 2012
    hi, do i need a license for melting copper scrap? because i already have a license for metal recycling. if u have information about metal casting please help me urgently.
  • Rajendra Kumar beginner adviser said on August 16, 2012
    Hello Everyone, I am into scrap business from last 12 years. I am MBA from IIFT, New Delhi & Worked for big companies like Indicaa global Dubai UAE for 8 years, OLAM Etc. If somebody wants to contact me for any inquiry in scrap, like if somebody wants to start the scrap business I'm available & I can assist without any problem. rajendra.kumar77@gmail.com. Please feel free to Contact. Rajendra Kumar Gaekwad, 0091-8826728803 0091-9013832379

    0091-8826728803 || Scrap Business Consultant

  • edlo said on August 19, 2012
    Hello, I would like to start a scrap or copper fabrication business in Myanmar, Laos or Thailand. Anyone interested to collaborate together. Thanks. ed_lo@ymail.com
  • joginder said on August 20, 2012
    hello, i want to start export business in india can anyone guide me and i need some exporters for that any exporters interested pls. contact me.
  • Ali said on August 30, 2012
    Dear sir, I have been in Dubai since 2009, i have a partnership in a scrapyard in Sharjah, UAE (30,000 sq ft area). currently we are carrying out business locally plus also have some sources who can supply large quantities of aluminum scraps which come from Europe, and can be used in manufacturing of aluminium ingots . As per my research I have learnt that aluminium ingot manufacturing business seems to have a lot of potential in all foreign and local markets. i am interested in setting up a medium size aluminium ingot manufacturing plant in raes al khaima or anywhere else in UAE , but do not have any experience in this kind of business. i will b interested to have a partnership with someone who is interested to invest on equal basis plus who also have some experience regarding this business. Plz kindly contact me on baz68@live.com...
  • Amit Kumar said on September 8, 2012
    Hi, I am Amit. I like to know about metal business. i am 35 years old resident of jharsuguda.
  • Raies said on September 13, 2012
    I am from Toronto i am looking to set up scrap business including recycling any one can feed me detail where is the best to set up this facility. Any one can supply me second hand machineries for the unit?
  • Ahmed said on September 16, 2012
    Dear All, Help me to start Scrap Business at Sharjah, UAE. I want to start a Scrap business. Do i need a License, If need where to get. Thx
  • kamran said on September 16, 2012
    I have a scrap metal business in karachi our product is the gun metal scrap Content (SN11% Pb 7% Zn2% Cu76%) i want to sell our product in the international market how can i calculate/select price/buyer kindly advise us, thanks
  • pawan said on September 17, 2012
    hi my name is pawan. i live in calgary Ab. canada. i have 10 years exp. in metal scrap business but from india. i am looking for 1 or 2 partners or investors, determined, hard working who wants to do something big in this field. i am planning to start this business as soon as possible, i have a good investment too. preferably experienced player of this field, doesnt matter which part of canada u are from. i can move anywhere in canada. contact me geetucan2002@yahoo.com
  • Sushil said on September 20, 2012
    I am sushil from chandigarh. I can provide lot of resources of scrap like plastic, papers. What do i need more to start business like licenses and.. please help..
  • sanjith said on September 24, 2012
    Dear sir. I want to start a scrap business like iron, metal, copper, plastic, waste news papers pls guide me how to do business & i am in bangalore, what are the investment where i want to buy & where i want to sell.
  • ryan allison said on September 24, 2012
    Cleveland, OH. I was wondering how you find the people to buy scrap in large amounts. Where do local scrap yards sell?
  • Josh said on October 1, 2012
    Am from slough uk and would like to start this business with minimal cost ASAP, part time as I work full time mon to Friday. I am good with networking too And the additional funds are needed for my family to be supported at this difficult time. The temporary holding area is my back yard however fully secured with no access to outsiders.
  • walia said on October 10, 2012
    i want to start a scrap business in winnipeg , please tell me the minimum investment to start my business
  • shivakumar said on October 10, 2012
    dear sir, I would like to import of steel scrap materials from Dubai and planning to supply the same to the end users in south India in larger quantity. If possible guide me towards buyers. contact No. 09844039974
  • Kerry Lamb said on October 12, 2012
    Hi, I want to start finding, hauling and selling scrap metal in the Toronto/Oakville-possibly niagra area-what is a good way to get started-i.e. cruising industrial areas to find scrap metal in bins? This is about all I have to go on at the moment, as far as, locating scrap metal. Any advice or tips you can give me would be greatly appreciated- Thanks Kerry
  • vijay v patil said on October 13, 2012
    dear, sir/madam, i want to start a scrap business in next year like m.s scrap , crca & ferrous scrap. please help me about how to start business, how many profit margin, who are suppliers in maharashtra & gujrat / in india & which is the legal activities to register my business & tell me some tips about scrap trading business. vijay v patil. vvp3732@yahoo.in
  • abdul salam said on October 13, 2012
    Dear Sir, I want to start copper & aluminium scrap business in Saudi Arabia. What I require is
    - A Project Write-up
    - Steps to familiarize myself with the Business
    - International Buyers Contact Details
    Thanks & Regards, S. Abdul Salam, Jeddah, Saudi Arabia
  • sikkander basha said on October 15, 2012
    hai sir , my name is sikkander i am in canada in nanaimo, i would like to start old scrap business so let me tell how to start ,how much investments need, how to send india, thanks
  • sunil dutta sharma said on October 18, 2012
    I want to start iron scrape business in Florida us. i am looking for a medium yard there. kindly advice me from where i can buy the scrape in bulk or i have to go for auction bid? i am visiting Florid in first week .Pl inform the complete detail of establishing scrap yard in Florida. thanks
  • Rajendra Kumar beginner adviser said on October 18, 2012
    Dear Sikander, Please write to me in details about your business model. How much of cash inflows have you got to be able to advise the size and location for your business. write to me on rajendra.kumar77@gmail.com Wishes, rajendra kumar

    0091-8826728803 || Scrap Business Consultant

  • johnny o said on October 21, 2012
    Thank u for this little info pls want to know all that is involve vin starting metal scrap business in Nigeria. Your advice will be highly appreciated. Thanks
  • Vanessa Naidoo said on October 23, 2012
    South Africa, Alrode. I am in the scrap business for a few years now. I bought my own business property and will start trading in November. Packing of containers and processing of scrap is fairly new to me. I need to gain quick knowledge and find about the dos and the donts. I have all my documents in order and I already have the cargo available to buy and I also have the sellers as well. Please forward me some information if you can. Thank You.
  • assaad said on October 23, 2012
    We are supplier of HMS 1 & 2 from Indonesia. We are looking for serious buyer/importer. There are 3000 MT per month. My contact info (+62)85399931609.
  • Mohammed aLI said on November 3, 2012
    I am interested in setting up a scrap metal business in West Yorkshire. Please can you advise on where the trade can sell scrap metal and how much is likely to be achieved below the london metal fix.
  • GK said on November 3, 2012
    hai Rajendra Kumar , my name is Gk i am in canada , i would like to start steel ,copper scrap business so let me tell how to start ,how much investments need, how to send india, thanks
  • ravi said on November 6, 2012
    i have big buyer in india ,bombay copper,iron.i am in live chicago USA.
  • salim manoti said on November 10, 2012
    MY NAME IS SALIM FROM TANZANIA, WE ARE DEALING WITH METAL SCRAPS, WE HAVE BIG PROJECT OF METAL SCRAP MORE THAN 200,000 MT, WE ARE LOOKING FOR FINANCIAL PARTNER WHO WILL BE ABLE TO FINANCE CAPITAL SO THAT WE CAN FINISH THAT PROJECT AND SHARE BIG PROFIT, WE CAN SELL THE GOODS TO HIM OR WE CAN SELL TO THE AVAILABLE BUYERS WHO WE HAVE ALREADY. PLEASE DONT HESITATE TO EMAIL ME IF YOU ARE INTERESTED. EMAIL: salimmusa@yahoo.co.uk. MOBILE: +255716778844
  • RN said on November 12, 2012
    Hi, I am planing to start a scrap business in UAE (Sharja) and I am looking for some experienced partner from India. whoever interested, please inbox me, we can discuss further.
  • Boopalan.B said on November 16, 2012
    I am from out of chennai . I would like to start this business pl give me the more Information that how to start .
  • Vikas Dhall said on November 17, 2012
    I want to start export of scrap metal from Canada but I would like to know the Initial investment as well as the actual procedures about how to carry forward the business. Thanks
  • matin said on November 27, 2012
    hello sir madam any one partner scrap india mumbai plz con me 09699947087
  • Praj said on November 28, 2012
    Hello, I am planing to start Metal Scrap importing business in India & i am looking for a business partner from Bangalore. any person who have experience & very good knowledge in metal scrap importing pls mail me to: medicalkk@rocketmail.com. PLEASE MENTION METAL SCRAP BUSINESS IN SUBJECT LINE TO GET QUICK RESPONSE...
  • bjm said on December 2, 2012
    Vadertank; Ft. Mohave Arizona it seems to me that 2 of our 4 local scrap yards are pulling the pin a little early in life. either they have made way to much money previously or got to spoiled when the boom was on. 1ml-1.3ml is what i hear they have their places up for sale for. i believe they make their mistakes in the trans. end of it all but who am i? One could start a business in a better spot for half that money if one had the capital behind them. interested in investing on the west side of Arizona. its closer to longbeach than phoenix is and compare the prices. that should be enough to get your attention right there. 928-727-5827
  • kameshkumar shah said on December 9, 2012
    I want to start recycle and metal scrap business canada to india plz help what the government policy how much capital to invest and how can I start.
  • Amit Ninama said on December 11, 2012
    Hi I am from Ahemdabad. I have Done MBA(Finance) so I am looking to start a scrap Metal Business. I would like information on what is needed to start Please tell me more Relevant details about EstabLishing a scrap Business and Please tell me the Minimum amount of capital to be invested in this Business to make it start do you need a license to start a Scrapyard? And if I do where would I go to get one ? How much investment is needed for this business and How to start ? Please and how to start ? Please reply via email or contact me 9974378310 on my cell please reply me thanx
  • Magnum said on December 12, 2012
    Hi i am from Vancouver Canada and looking to start a scrap metal business. I want to either partner up with someone with experience in this field or get some advice on how to get this business started. I also have some money to invest so any kind of help is greatly appreciated. Please contact me if this interests you thanks email: harrsmike@yahoo.com
  • sudhakar said on December 16, 2012
    sir I am from Hyderabad( AP), I want to enter into scrap business especially importing from overseas, which country is more suitable for importing scrap to India, and which product is more profitable, plz give me a piece of advice.
  • Sk Mujibur Rahman said on December 19, 2012
    i want to start metal scrap business in india so please guide me about how to purchase and where sale scarp ,who is scrap purchaser. Sk Mujibur Rahman , Jalgaon , Maharashtra ..India
  • RAMESH NAIDU said on December 22, 2012
    I WANT TO START SCRAPE BUSINESS AND RECYCLING OF SCRAPE, PLEASE ADVICE ME
  • Kaizer Lokhandwala said on December 26, 2012
    Dear Friends, We are a Dubai based company dealing in all types of metal scraps. we supply locally as well as exports. We work on TT / cash n carry as well as on L/C basis. We welcome the buyer to be present for loading. We have no objections or concerns regarding the same. Presently we have access to 7000MT ready for shipment from UAE. Presently as on 26.12.2012 our prices are UAE Dirhams 1600/MT exyard. If you need pictures we can send you by email. You can email us at STELLARGLOBAL1@GMAIL.COM
  • Kaizer Lokhandwala said on December 26, 2012
    We are having our scrap yard in Sharjah, UAE & wish to appoint hardworking serious commission agents who can represent us to sell scrap. No time wasters, only serious persons may contact us immediately. Our monthly supply capacity is 5000MT. We work on TT basis as well as on LC basis. Yard visits are allowed. stellarglobal1@gmail.com, Kaizer Lokhandwala
  • awan said on December 30, 2012
    Hi, I live in Ireland(LImerick) wanted to start Scrap business, any help would be appreciated to export scrap from Ireland to Pakistan. From where to start, is any license required?
  • rahul kale said on January 2, 2013
    hello my name is rahul kale and i am from nashik (m.s.) i want to start a metal scrap business as i dont have any knowledge in this business i need guidance in every aspect. any type of business proposal in this field is welcome pls contact my email id is rkkale69@gmail.com. i am also interested in steel scrap business which can be carried out locally thanks
  • FAISAL ZAHEER said on January 4, 2013
    Hi, We deal in all type of scrape and carpet pieces (LEFT OVER) if you can supply me in bulk do not hesitate to write me on fzaheer@hotmail.com Thanks and Regards
  • Lukose said on January 4, 2013
    I am from UK and have ready to Export scrap metals (Ferrous or Non-Ferrous)in bulk. Quotes (Queries) are invited from potential buyers !Send details to lukeexp@gmail.com
  • suresh kandasamy said on January 10, 2013
    Hello sir, I am a service provider for import scrap items from U.A.E. If anybody interest to procure the scrap. Kindly contact me my mail ID : kandasamy786@gmail.com
  • dastagir khan said on January 10, 2013
    I feroz khan from hyderabad andhrapradesh i am doing scrap business from last 7 years in lots of competitors now i want to do business in various states if any body want to share business with me pls mail me feroz_ k50@yahoo.com inshallah i do
  • Naveen said on January 21, 2013
    Dear , i need best quality HNS1/HMS 2 scrap for india ( delhi )from UAE & Kuwait & qatar , . kindly quote me on the same with break up of cost , duty and other charges. we like to do long term business . direct seller cont only on nk_sham@rediff.com
  • biswanath tiwari said on January 23, 2013
    kolkata, west bengal, india. i want to know that name of company where iron scrap come out in india.
  • Michael said on January 29, 2013
    Dear Sir/Madam. I am from Mississauga, Ontario, Canada. I'd like to export scrap metal from Ontario to Vietnam. Please let me tell how to start ,how much investments needed, how to export to Vietnam. Thank you very, very much!
  • Chuck Catchings said on February 11, 2013
    It amazes me how many people want to get into the scrap metal import/export business and don't have a clue where to start or even what to do. This takes years of building relationships and learning the business. It is NOT easy. I have been in this business for almost 5 years. I have established relationships with several international buyers like Hyundai and Cargill not to mention some smaller resellers. I am about to fly to Chile,( later part of Feb. first part of March) to close on an agreement with a large seller-supplier there. So if you really think this is something you want to do I'll teach you. I'm only looking for one or two students, male, female doesn't matter. This is NOT free but if you are interested let me know ASAP. Do not contact me unless you have time and a small amount to invest into your future. This is a business not a hobby.
  • Venkatesan said on February 14, 2013
    I have tonnes of metal scrap in my hand. I want to know the address of main scrap buyer like foundry or furnace.
  • Raj said on February 15, 2013
    Dear all, I'm from Malaysia and currently running a scrap yard in the city of Penang. Its been more than 5 years I'm in this industry starting off with metal and slowly diverting in to plastic and electronic components since there's a lot of competition in metal industry, furthermore scrap metal prices always fluctuates tremendously. I'm currently seeking anyone out there who can supply me electronics scraps such as motherboards, scrap ic's and other parts in large qty or we can build up a partnership on this. Those who wants to be my overseas source or partner can email to me for more details. Anyone who wants to learn about this trade are welcome too...but it takes some years to master this trade. Regards Raj
  • Murali said on February 16, 2013
    i am new to this industries i am surviving to start plz help for me thank u for further assistants
  • aman said on February 17, 2013
    I want to start metal import business. anyone please tell me about the processes in metal import and can anyone give me the guidance please. and also I have good links in new zealand, canada and australia. my email id is anything4future@gmail.com
  • ARAVINDA PRASAD said on February 18, 2013
    Dear Sir, I WANT TO START THE SCRAP IMPORT FROM OTHER COUNTRIES TO INDIA, RECYCLE/PROCESS/EXTRACT & EXPORT FROM INDIA TO SOME OTHER COUNTRIES. I AM RESIDING IN VISAKHAPATNAM, ANDHRA PRADESH, INDIA. PL HELP HOW TO START ALL ABC. PLEASE REPLY ASAP. THANKS. ARAVINDA PRASAD
  • Hari prasad said on February 21, 2013
    hi please let me know to start up scrap business
  • piyushBabel said on February 22, 2013
    Dear Sir/Madam, I would like to start a Scrap Metal Business in rajasthan area, and would like your help as to how to start it, what kind of licenses I need, and how much capital do I need and how much profit i earned in this business. Any relevant information you can send, will be very helpful and appreciated.
  • Riyaz Ahamed said on February 27, 2013
    Dear Sirs, i am working in Singapore in marine industry, i would like to start scrap business either exporting from S'pore to India or starting in India, could you please guide me abt the minimum budget required to start this business.? if anyone interested i would be able to tie-up. Thanking you in advance.
  • Praj said on February 28, 2013
    Hi I am from Bangalore (India). I am planning to start Metal Scrap & Copper importing business. I want a consultancy who have thorough knowledge in the field of importing Metal Scrap/ Copper etc. I am looking for a business partner with this domain knowledge or a consultant who can help us in setting up. I also want all the buyer details who can buy metal scrap & copper in large quantity. pls mail to: cofunding@yahoo.in
  • mazhar said on March 1, 2013
    hello all, i am interested to buy refrigerator compressor scrap in bulk quantity on regular basis if any of you serious please let me know either phone me @9059653387 or email me @mazharicebond@hotmail.com
  • KAMRUL ISLAM said on March 4, 2013
    dear, Riyaz Ahamed, i am interested and began scrap business with you. i am from bangladesh. i like joint venture. we are both huge amount making. kamrulctgbang@hotmail.com
  • Anandvir Sandhu said on March 7, 2013
    Hello guys. hope u all are good. I am also looking to start that scrap business in india. Please guide me how could i sell my scrap directly to recycling factory or furnace....
  • junaid said on March 8, 2013
    hi guys u all need to know about scrap kinds of scrap there market price buying and selling price and transportation cast labour cast etc one-thing more there is no limit for funds u can start with v small and even with a big amount but homework first and decide from what lavel u want to start
  • Suresh said on March 13, 2013
    Hi guys, I would like to start a trading business in scrap metal industry. Meaning buy and sell directly to the end user. I have lots of contacts around the world but haven't established any transaction yet. Do you think its a good idea to get started without having a scrap yard & with zero background. Pls guide me. Thanks a lot. email : veno0606@yahoo.com
  • RANJIT KUMAR BHAKTA said on March 19, 2013
    I AM LIVING IN KOLKATTA . I WANT TO ENTER IN SCRAP IRON AND VEHICLE SCRAP SO PLEASE GIVE ME THE SUGG. HOW I DO THE BUSINESS I HAVE SOME SCRAP IRON IN MY HAND. MY M.NO.09836275119/08820167820
  • matin said on March 24, 2013
    hello all, I AM, LOOKING BUSINESS PARTNER FOR IMPORT SCRAP ,I AM INTERESTED TO BUY HMS, 1,2, IN BULK QUANTITY ON REGULAR BASIS IF ANY OF YOU SERIOUS CON, ME MY CELL NO 09967838091 MAIL ID amex.trading.co.ltd@gmail.com
  • Jignesh patel said on March 28, 2013
    Hi i am jignesh patel, i have requirement on HMS and MS casting scrap available in out of inia dealers. Please send me your requirement details to kenascrap@yahoo.in
  • kamal chauhan said on March 30, 2013
    hi... frnds this is kamal chauhan fron gurgoan (haryana)i just want to set up business of scrap in gurgoan ....i dont have any knowledge about it ....i need a business partner ...if any one interested cont me at +919999965630.....
  • uppu krishnarao said on April 1, 2013
    i want to start a scrap business how much money need to start the business. this business can be treated as small scale or what else. is there any govt encouragement towards this business by govt industrial department or any nationalized banks?
  • pawandeep singh said on April 4, 2013
    i have a stock a scrap metal. if interested person. Cal me 9810458266
  • sal said on April 4, 2013
    Hi I am looking for suppliers of scrap copper to be shipped to the UK. Looking to form good business relationship with the right honest people first at trial basis until both partys feel comfortable to proceed onto bigger orders. If you can supply at competitive prices please get in touch thanks.
  • kervin said on April 10, 2013
    Johannesburg, Gauteng, South Africa. I would like to know how much does it cost to get scrap license or certificate?
  • manish said on April 12, 2013
    Hello, I want to know more about this business ,please advise
  • Suresh said on April 13, 2013
    What are safety & obtain license for metal scrap type of business to start.
  • lorraine said on April 17, 2013
    Hi i am in the process of starting a scrap metal business. i have my supplier already i'm just waiting for my import license. i am looking for interested buyers of scrap metal. Kindly tell me what type of scrap metal you are looking for and quantity. Thank you
  • adnan siddique said on April 17, 2013
    assalamalaikum i want to import scrap material from south africa to dubai basically i am from india. please give me the all details thanks
  • adnan siddique said on April 19, 2013
    assalamalaikum i had sent some request but yet i haven't received response from ur side. my query is how to import iron scrap to freeport dubai from south africa ? i am waiting for your reply.

Your Comment

(All the above fields are required.)

Categories

Popular Articles

Join Our Newsletter