Starting a Steel Fabrication Shop

Sheelanand Kullu said on February 16, 2014

Sir, I am planning to start up a new fabrication shop in Rourkela, Odisha with a capacity of 200 tonnes. I need proper guidelines, please help me sir. ph-07504316345.

augustin said on February 18, 2014

i want fabrication order in thane

utkarsh gupta said on February 23, 2014

location - noida, state - uttar pradesh, mobile no-9897731656, i want to start a sheet. metal business for manufacturing small n compact type of components of brass and copper. what are the machines required for these kind of operations and where should i buy them . also mention how much investment is required to start the business.

sayeed shaikh said on February 26, 2014

i want to start aluminium retail shop in banglore city with the investment of 10 lakhs rupees please suggest me the rite place

sayeed shaikh said on February 26, 2014

i want to start aluminium retail shop such as sliding window material, fascade cladding, aluminium composite pannel, backlite sheet etc. investment of 10 lakhs rupees please suggest me the rite place on rent

chandra sekhar dash said on March 6, 2014

i have a land of 4500 sqft in bhubaneswar. i have no experience in mech .field.but i want to start a steel fabrication workshop. capital only 70,000 lakh

Nagarajan said on March 6, 2014

from where i can get the metals for grill works as wholesale. i am in tirunelveli.

Trymore said on March 14, 2014

Hie pilz help me i want to start a steel fabrication workshop in zim what must i buy first or do i need to get a project then buy machinery

suresh Gupta said on March 16, 2014

I want to start a Iron and steel fabrication unit in Bhiwadi, Rajasthan for grills, gates.doors etc. and own sufficient land around 1000 sq yards.I want to have complete details viz.: machines required, cost of machines, cost for construction of sheds for working area, type and cost of raw material required, and detailed project report including cash flow, funds flow, projected balance sheet for a plant of 2-5 Mt per day. Also require manpower needed,power connection required. Please inform your charges also for supplying the information and for future guidance in procuring and setting up of machines and the unit. Please make it fast.

NARAYAN said on March 17, 2014

HI. Myself Narayan from Bangalore. i am fed up by this private job.. i want to start a new business in steel fabrication and welding.. i dont know how to start it actually.. should i get trained in some pvt companies .. i have a budget of 10 lakhs ... please suggest me some ideas.. my contact number is.. 9538241311

mohan said on March 19, 2014

50 years chennai company needs partnership in hi-tech like nano, precise machining. we have good network and skilled labors.

Abhishek Tripathi said on March 21, 2014

I am planning to start a rolled steel jointed pipe workshop but i do not have any contact of installation and setup manufacture consultant. please provide some contacts of best consultants & setup provider.

sha said on March 26, 2014

hi my dear friends am having steel furniture(bero) manufacturing company in chennai(mangadu). if u want bero contact me frds 9003265633

Akram Hossain said on April 13, 2014

I want to buy second hand pipe blender machine wit gear...pls where to get

Dammika de Silva said on April 29, 2014

we capable of any type of steel fabrication work , structure steel works ,any section bending thread cutting work and we are looking for partner how can promote business to us with good work with our company in Sri Lanka with contact no 094-727590054

S Ratheesh said on April 30, 2014

location : bahrain. need to set up a steel fabrication job at a medium level. need to know the basic list of machinery required. Regards S Ratheesh

rashesh panchal said on May 7, 2014

i want to start small fabrication unit at my village, plz guide me i m mechanical engineer and also work in fabrication company so plz give me proper guide line for it about machinery and which machine tool and others machine which need for fab work and how to cost it and how to be best in this business. regards Rashesh Panchal

Anuj Agarwal said on May 15, 2014

Sir, I want to set up a small fabrication unit at my place which is involved in making of Grill, gats, shutters etc...kindly guide me through the projects and machinery so that i can get it done as early as possible.

Rakesh Khare said on May 18, 2014

I AM RAKESH KHARE HAVING 10 YEARS EXPERIENCE IN CNC CUTTING & HEAVY FABRICATION. I HAVE A UNIT IN NASHIK, MAHARASHTRA. WE CAN DESIGN, DEVELOP, MANUFACTURE & SUPPLY VARIOUS CNC PROFILE CUT, FABRICATED & MACHINED PARTS AS PER CUSTOMER REQUIREMENT. MY CONTACT NUMBER IS 9011376866. WE ARE LOOKING FOR CUSTOMER WHO WOULD LIKE TO OUTSOURCE CUTTING, FABRICATION & MACHINING.

nani babu said on May 18, 2014

I have 17 year experience in steel fabrication works, Recently we start the AMBICA INDUSTRIES in KUSHAIGUDA HYDERABAD, we are doing Toolroom jobs and Cleanroom jobs and other Fixtures and fabrication jobs, for enquirers please contact me on mob:+919246153321 email:ambica.industries2013@yahoo.com

rajnish jain said on May 27, 2014

To start ss workshop (chair&tables) small scale, Kurukshetra

Shankardeep Borkotoky said on May 28, 2014

I am ready with a steel fabrication unit area 2700 sq ft with 15 kva electricity power installed but could not start it due to lack of skilled labour. Need to buy machinery also. Investment 2-3 lacks is ok. Please advice from where and how to get it.

Thabo Molaudzi said on May 29, 2014

Hi, I want to start a ducting manufacturing company, where can I get the machine and how much it cost. am in south Africa jhb. 0719654313

Datts said on May 30, 2014

Hi, i am BE mechanical having sound experience in project management. I want to start business in pune / mumbai related to manufacturing / EPC projects. Pls advise

mahboob ali said on May 31, 2014

Hello sir/madam my name is mahboob Ali, I want to open a fabricator shop in gurgaon. from where I can get contractors and builders and owner contacts and email address so that I can contact to them. please inform me ASAP thank u so much.

vipul panchal said on June 2, 2014

I am a steel fabricator like railing, cupbord, any sheetmetal work i will do it i want an order to start my own work pls contact me any kind of railing work or sheet metal work my no is +918879096924

vikas said on June 6, 2014

I am interested to start a steel BW pipe fittings in kolkata. Suggestions welcome. vikasch@mail.com

Prabhat Jaiswal said on June 6, 2014

Sir, I am doing business in iron and steel since 10 yrs in kolkata(w.b). My age is 35 yrs.young. Now I want to do the fabrication work regarding iron and steel. In this behalf I trace industrial land approx above 10000 sq.ft in howrah dist. Please suggest me the proper process i.e from business plan , financing, commissioning of plant & machinery, marketing , ordering and supplying of the product , technical knowledge that I need that means total blue print.

ashish said on June 14, 2014

Please advice what i start with. I have a industrial shed in mohali, punjab

Prakash engg works said on June 16, 2014

if u want any fabrication related work to get done .. contact praksh engg works jaysingpur (Dist:-kolhapur) Ph. No:- 09850031002

RAMESH JAGTAP said on June 19, 2014

I am planning to start a laboratory modular steel furniture manufacturing business in Vasai Virar (Town), Maharashtra (state), India (country). i have 26 year experience in same field in sales & Technical director & i do not tension for sale. because my repo in market field.But I don't know how to start the business? minimum 6000 sq.ft space is required. but main problem is finance. how can you get the finance with subsidy. Total finance required is approx 50 lacks all machinery & rented industrial shed with running capital. i am total confused plz. guide me.9320086376 /9762474103

sanat kumar bhanja said on June 22, 2014

Sir, I want to start the steel fabrication shop at Bhubaneshawar, I would like to know the equipments required to start the workshop as well as estimated cost excluding Land & building. Regards, Sanat

sreekumar said on June 23, 2014

I would like to start a stainless steel fabrication unit to produce commercial kitchen equipments and stainless steel furnitures what should be the size of the factory shed, machinery requirements, and the project cost.

Arun Kumar Sharma said on June 29, 2014

I AM A MECHANICAL engineer having 6 years experience in product development machine shop and fabrication. Sir, I wish to start a Mechanical and MS fabrication work shop in Faridabad. Please advise me how can I get registration, License, Income tax and service charge remittance details. My mobile no.is 9711182012. Thanks

Thomas said on June 30, 2014

Well i saw lots of entrepreneurs above its tough competition. Good well i have some offer to one who plans to earn some money you can be project controller, project manager, incharge or market watcher. Ok. To the one Who will guide the market or the place where i can meet new clients or works projects to go on with my business. Those who can bring me orders for structure and pipeline fabrication erection as well boiler orders will be benefited contact me at thom88mech@gmail.com

Gunaseelan said on July 1, 2014

I have requirement of towers of TNEB and KPTCL design, supplier should be approved by the utility. Also has a big fabrication team for towers. I can support in getting registered with the utility. my mail gunaseelanrv@gmail.com, ph.9986224168

STEcc said on July 6, 2014

I have an 900sqm work shop need partner. Have main machine need some, our country NAMIBIA is a new uraniun producing country. And the town we are is in the radius of 10km to 40km from five of this mines. We have great opportunities to and prospect. My e-mail:universalglass@ymal.com

Nikunj Shah said on July 16, 2014

Hi. I am located in Vadodara Gujarat and plan to put up my fabrication shop here. but can u suggest if there are govt schemes and incentives for acquiring the machines since my investment capacity is very low..how much i have to invest primarily. how much square feet need for shop including office. should i incorporate all machines before i look for projects or should i look projects first? Also suggest how to go about it if we have some technical knowledge in this field but dont know where to get the orders or clients from..

shridhara v said on July 22, 2014

HI i am Shridhar from shimoga my shri enterprise we have 30 members man power with excellent workers also we are doing temporary water proof pedals Fabrication, erection, higher, heavy structure & Tower erection works please any works contact me 8884930385,9731159174

omega engineering said on August 5, 2014

Hi, I am fabrication contractor, I have good team of labour and we are capable to fabricate any type of order with good quality. So any company wants /needs. Contractor please contact me on my email address thanks.

Sarvesh said on August 6, 2014

I am residing in Vadodara and want to start fabrication business from compound of my own house. is it illegal to do so ? do i have my own shop for these ? which type of permission do i need ? list out govt. agencies to be contacted ? is there any role of Police also ? pl. help me

SUKHVIR SINGH CHAUDHARY said on August 23, 2014

I want to start an engineering fabrication setup in RICO industrial area Dholpur, how to start to set up which type of permission we should get & from where? list out govt. agencies to be contacted? i need to know the steps from the beginning to setup completely and from where i can get second hand equipment in good condition. I need complete support including the design of website.

M.Jeyakumar said on August 23, 2014

hi my name is jeyakumar i need fabrication customers address is chennai my mobile number is 8124722456

Deepak Sogani said on September 1, 2014

I want to start a fabrication workshop with an investment of Rs.15 L, we are presently outsourcing the fabrication work from vendors as we do not have much work for now. Any person experienced in this field and want to make some product can become our partner.

S Rathore said on September 7, 2014

Dear All, Good Eve.. Self S Rathore from MP-India, working in Indian based MNC as a Sales-Manager for Crane hiring & project logistics division. I am an electrical engineer. I have very good contacts with erection and fabrication EPC contractors all India. I want to start erection & fabrication small scale business/ sub contractor. I have a fiend who has done same business but now due to financial reasons he is unable to run it further so i want to start with him. Kindly advice how we take a start up. Financially we are not very much sound and cant spend huge amount at initial stage. Regards, SB Rathore M: +91 88789-48000 Skype: ss.rathore2

rajesh kumar said on September 8, 2014

I am a marketing consultant and now want to start fabrication work shop with limited capital. At present i have orders for fabrication work to offload. Interested vendors can contact me 9610189215. Also need suppliers for steel sheets and pipes

vivek jaysingrao pawar said on September 13, 2014

i am looking for orders in fabrication in sangli . maharastra 416416

Kulwant Singh said on September 21, 2014

I have experience in PEB Industry from last 10-15 yrs but now I want to Start my own unit with all Atomized equipment's Initially 02 Units are set up by me for other organisation. So I know how to install or which machines and where I bought the machines. I had good contacts in market also for project inquiries but only financial problem I face so How I got Loans or help from Government to Install Machines. I had a 10000 sq.ft Land and start building work, Satrt in Udaipur, Rajasthan.

Kulwant Singh said on September 21, 2014

If any one need my help for PEB Designing or Estimation or plant set up purpose pls contact on mail ksn3369@gmail.com

laxman said on October 6, 2014

Hi sir, I'm chemical engineer by profession. Presently working with Engineering company as a design engineer. I wanted to start up with my own business in same field. I have good knowledge of designing of heat exchangers distillation column. But don't know, from where should I proceed. What type of equipments fabrication should I go for. Please guide me. Waiting for your response.

Jasvindar Kaur said on October 6, 2014

hi I am jasvindar kaur i want to start steel fabrication in bhilai nagar chattisgarh state ,i can invest 5-6 lakhs on small scale please suggest me how i can start and from where i can get order . Thanx waiting for answer as soon as possible. You can contact me on my email i-d that is ghkucmas@gmail.com.

SATHEESH KUMAR said on October 16, 2014

I have 4 year experience in steel fabrication. I want to start my steel fabrication plant with a limited capital (1-2 lakh)in salem , tamilnadu. I have been asked to prepare Project Report for Steel Fabrication shop. Client is fabricating equipments for commercial. Could you please tell me what are the essential components of steel fabrication shop? Ideally what should be in steel fabrication shop? What should be the expertise of workers and engineers? What are the opportunities for steel fabrication shop other than catering food processing industry. With regards Satheesh

khalid said on October 20, 2014

hello gentlemen, I planning to start business of steel fabrication workshop to meet the needs of the industrial market(petroleum and oil projects- storage- pipelines - valves. and ship repair complex. in OMAN- DUQM. I looking for qualified partner/ and some advices about the equipment's required. Khalid Al Junaibi, 00968-9989344 peace4oman@yahoo.com

pramod ithikkat said on October 26, 2014

hi, i am planing to start a welding shop in Doddaballapur, Bangalore. but i have no idea how to reg. my company and how to license for industrial fabrication company. i want to know how much cost of equipment for welding shop and where we can find good machines

md abbas Khan said on October 28, 2014

I went to start a welding and fabrication subcontracting company. I have 12th years experience in the welding and fabrication line. I live in West bengal .kolkata city. Please contact me and help me. To start a small subcontracting company. Please help me. Call me 9735608706. Email address mdabbaskhan528@yahoo.com. Contact me please. I need help

Damodar said on October 30, 2014

We are having a M.s.Fabrication tiny unit at ponda-goa wants to start cupboard and steel furniture, please guide us regarding raw materials like m.s.sheets and other required items and a team of labourers is required to make furniture.

Roy philip said on November 9, 2014

Now i am working in abored i have 22 years experience in fabrication field, recently coming back in kerrala and start a good unit of fabrication,OR jointed a good firm i am amechanical engg- diploma holder anybody Have interest pls, sent a mail. my email- royphilip1@yahoo.in, thnks,Roy philip.

shaju said on November 14, 2014

i like to start a steel workshop in dubai

Devang Madhyan said on November 20, 2014

Hi I am Devang Madhyan. I want to start a cnc workshop on small scale. But what to start first, the installment of workshop or to get orders. How should i get orders. how can i become a vendor or subvendor of any company.

udaya kumar said on November 24, 2014

hi, i am udayakumar, fabrication contractor. i have good team of labor and we are capable to fabricate any type of structure and job works with good quality. So any company wants contractor plz contact me on my email add. especially in south india (kerala) my no.08149828822.

Agam Gulati said on November 28, 2014

Hi, I am from faridabad i just start steel fabrication ,we need order or consultant from we get fabrication order.

Faruk Saifi said on December 1, 2014

hello sir I have 25 years experience in all kind of steel fabrication, erection, truss, column, PEB structure erection. fire. oil. gas.& ss.pipe line .HVA/c ducts. spl :- In brade (food) Industry of A to Z work etd. my business in all over India. my name faruk saifi from ghaziabad u p INDIA. m/s all tech engg. & fabrication 09917529329-09990716508 farukalltech@gmail.com

Vijaykumar said on December 4, 2014

I have 20 years of experience i Fabrication and erection of heavy steel structure. I have worked with reputed company. Our company has built international Airport all over India. Now I am started my own business in Bnagalore please contact me for your requirement - 9845988337

mahesh tribhuwan said on December 28, 2014

Hi, I am mahesh from aurangabad, india. I wanna establish small fabrication plant but has lower fund estimation & plz suggest me where from will get me more fund to launch it .

jullius said on January 3, 2015

I am keen to start a steel fabrication workshop in Uganda East Africa, specializing in furnishing residential and commercial structure. I need a steel fabrication consultant whom i can engage to have this dream come true. jbpragmatix@yahoo.com

sonu alam said on January 14, 2015

what process to open steel fabricators workshop. I want to know full details about that. how can I got authority ....plz tell me

Rajendra khinchi said on January 27, 2015

Hi I am rajendra from jaipur rajasthan india. I am also a fabricator of tubular steel structure and peb structure. I hv lot of knowledge of tubular steel structure I wanna know other equipment using in peb shade

Henry Woolf said on January 29, 2015

Hi I am a sub contractor and specialist in sheetmetal and boilermaking. if got 20 employees and are 8 years in business, if you cant cope with your workload feel free to send me an email at hcweng@ymail.com

sekar said on February 21, 2015

we have steel fabrication shop in chennai , if any one willing to give order for supply of machinery like pug mill , sand mill , attaitor ,all type of lab mills , grill works , ss handles , etc.. please contact the number : 9043385049

syed mohsin ali said on March 1, 2015

I have a st.stl 3 roll die of crusher mill I imported from us from crankandstein. Net I.e model 328d you browse and check how it is now I want lathe machine engineering & steel sheet moulder and also one St. Steel welder to make one table/hopper/base in St. Steel and fix one motor/belt/wheel/pulley etc by perfect angle measurements to make barley crusher mill Machine complete in hyderabad india

murthy said on March 3, 2015

Having 15 years experience in mechanical works , antenna field, solar field, want to start an fabrication unit in bangalore, Murthy 9731441108

priya said on March 9, 2015

i am mechanical 2 year student how to improve core skill

Vikas said on March 13, 2015

Hi , I have 4000sqft workshop under construction at 65km away from Mumbai. I am planning to set engineering fabrication work but doesn't know what should i start with? welcome for all ideas.

08866282822 said on March 26, 2015

I have full setup factory located in city ahmedabad state gujarat country india i want labour who can make milk, acid, petrol, diesel, e tc tankers pls contact me for work 8866282822

RAM VAIDYA said on April 13, 2015

Hi, i am Ram Vaidya, from wardha maharashtra, i want to start fabrication shop regarding engineering projects, how should i proceed. please stay with me... Thank You

Ashfaq Hussain said on June 6, 2015

I have plan to set up a new Fabrication work shop in Hubli karnataka. please help me how to take the orders and how should i approach to the clients... Thank you.

dnyanesh shinde said on June 6, 2015

i have fabrication shop now i am searching for order of work i need some product which i produce in my fabrication shop & sale that product pack market easily

Bandr said on June 12, 2015

Hi to all, I am about to start my fabrication business in KSA and i am looking for operator and CAD designer for CNC Plasma cutting machine. Anyone have experience? Regards Bandr

ROYPHILIP said on June 19, 2015

sir I want to start a fabrication shop for any were in kerala ,equipments, trailer body, machine parts, steel structures, tanks, and every thing, i have twenty five years experience in this field, i am looking for a good partner, pls contact my email, my email. royphilip1@yahoo.in, Roy Philip

kailash nayak said on June 26, 2015

sir I want to start welding business, give me idea

Giriraj said on July 3, 2015

Hello sir , I have 5years exp in sheetmetal fabrication work ,I want to start fabrication shop in Belgaum, I have skilled workers and I have shop also ,need to get orders ,please any body suggest me if any orders ,I can transport also.......contact me 9164075156

daniel mabuba said on July 12, 2015

hello my home country is Tanzania i have introduced a small metal fabrication workshop please i'm looking for investors, training,

Prasanjeet saha said on July 15, 2015

I have around 10 years experience in eot crane & electric hoist design up to 20 ton so i want to start my small workshop for suitable that with a limited capital (2-4lakhs)what should be better for me please suggest me also give location plant to be establish. You feel better me plz contact :- 08622882024. My work shop location planning, nearby by kolkata, Dist-Hooghly, west bengal.

farai said on July 27, 2015

I am a qualified boilermaker from Zimbabwe.former maintenance supervisor at Bp oil refinery plant harare . currently am workshop supervisor for a Mozambican company specialized in petroleum tanks and service station canopies for bp,total,puma etc.I want to start my own company, so serious investors please contact me on +258 844309903

vrushal shinde said on August 9, 2015

Hi, I am starting my own fabrication business on a small scale I need this work on regular basis..

vrushal shinde said on August 9, 2015

Hi, I've started my fabrication business I need to have some work regularly

JACKSON C CHRISTALIN said on August 20, 2015

Our company is located in PADI ( CHENNAI ). This is an Mid-scale company running for about 25 years... The most of the Jobs done here are hydraulic tanks based projects. The profit.... Jobs...customers... Labours are totally low, any suggestions to get updated to the latest trend and rise up the company ? I'm sincerely requesting for any kind of help from the experts to overcome all these troubles. Thank you, Contact : +918680070826 / +919383250624

ayyoob khan said on September 5, 2015

I have a factory land in Noida. I am planing to start a steel fabrication workshop in Noida, Uttar Pradesh, India. please give some ideas.

Joses Bosco Gomes said on September 26, 2015

TO start a fabrication business you need to have good knowledge of fabrication work , Hardworking & innovative . Financially their is a investment but make sure you have a good client in hand who can give you job order . Important is your rates should be competitive, Execution of job should be to customer satisfaction .

Rohit Munde said on October 4, 2015

Hi, I am setting up fabrication unit in karawal nagar north east Delhi. In my shop work as a fancy steel gate's, computer designs grills. Every made in my shop. You have order's get me my mobile no is 753288668 and email to rohitmunde93@gmail.com

jithin said on January 8, 2016

Hi i am jithin,i am starting a welding shop.how to get license to start welding shop?

faruk rasel said on January 22, 2016

I AM AN STEEL welding workshop. NOW I AM DOING SMALL WORKS OF STEEL BUT I need window door shade BIG PROJECT. HOW CAN I GET IT Please INFORM. MOBILE:+971505961057 or farukrasel35@gmail.com.

Shreyak said on January 27, 2016

Hi please let me know the minimum investment , manpower required to start a steel fabrication shop @ bhubaneswar odisha . Please provide all details.

nasser goodarzian said on February 4, 2016

HI, I want to establish a work shop for steel structure and industrial equipment. pls guide me

mehul said on March 12, 2016

hi I am Mehul I want to start the metal shop , but no idea so please help me to do this business and whom should i contact or get the information for different tools to buy. How can i get more and more customers to my shop once i open it?

DEBANGSHU KAMILA said on May 17, 2016

I debangshu. I am good still febricatter .my need a good job salary 20-25000

Raj verma said on June 1, 2016

Hi I'm RAJ from Chandigarh. Anybody can ask any query about S S STEEL fabrication. My email ID is Kraj1551980@gmail.com

chirag said on June 17, 2016

Hi, I want start Aluminium Windows/door, Stainless steel railing work shop in outside india. Anyone have experience in this line and can set up my whole workshop. Best Regards, chirag, sheth333@gmail.com

santhoshkumar koliyadan said on June 27, 2016

I am Santhoshkumar from Kerala, worked as a production steel bldg factory as a Plant supervisor, & site engineer with 23 yrs overseas experience. I would like to work in Kerala as project Engineer (Production/ Site).

senthilkumar said on July 21, 2016

i am interested for steel fabrication in chennai, tamilnadu. i would like to know how much space i need for this workshop and what should be my budget. what machinery i should buy for this?

“Starting a Steel Fabrication Shop”
Comment Page 2

Comment

Categories

Popular Articles

“Starting a Steel Fabrication Shop” Comment Page 2

Comment

Categories

Popular Articles

“Starting a Steel Fabrication Shop”
Comment Page 2