STARTUPBIZHUB

“Starting Steel Mini Mill”
Comment Page 4

  • Rahul said on April 12, 2014
    I have a investment capacity of around $100000/- and looking in to partnering manufacturing steel tubes in Maputo Mozambique
  • lawrence said on April 20, 2014
    i am lawrence from nigeria, pls sir i want to know estimate of starting steel rolling mill
  • Ravi kumar said on May 3, 2014
    i want one suggestion from all of your side.... actually i want to start my own business in my relative mechanical field (steel rolling mill industry) in uttarpradesh INDIA. what kind of basic need i should have to consider during startup a manufacturing business. I should have to take some experience or another thing like any degree relative this field. What is the project cost needed to start the business and law, certification, bank loan etc. thanx in advance.....
  • Mayur panchal said on May 22, 2014
    I am very interested to start steel mini mill please send me the quotation of steel mill and also want your guidance
  • Roshan Din said on May 23, 2014
    I want to start a 300 per month capacity TMT Bar rolling mill in an industrial Pak under development Near Rahim yar khan Punjab (Pakistan) of size 4 -25 mm Size. Plz give me approximate estimation for plant installation with supply of all machinery,Land,Shed long with Power supply axilliaries. Only details of machinery with approximate price of machinery. kindly can someone tell me what would be the set up cost involved in doing this . thanks, BR; Roshan Contact +92-3008568147
  • kundan sharma said on May 26, 2014
    I want to start my business with opening steel plant. I need inquiry about investment money to open this plant.
  • Balakrishna Reddy said on June 2, 2014
    Most of the people are planning to start mini steel mill or reroling units. Because of the power problem so many units suffering. To have business experience and profit calculation and financial requirement first you go for a lease mill. Near chennai mills available lease or sale 09949502266
  • Mr. P Jagtap said on June 8, 2014
    Respected Sir, For our melting plant we do require 200 / 300 daily MT Scrap. If u have plz reply. Thanks, Mr. P Jagtap, Managing Partner – AP ISPAT, Offices – INDIA - Mumbai , Nashik , Pune etc. Overseas - UK & UAE . Mobile – 00 - 91 - 8380023356. Email - sairajispat@rediffmail.com
  • Raza mohammad said on July 3, 2014
    full information for rolling mill and its cost
  • sanjay choudhary said on July 5, 2014
    @Dear Rata, you want to full information about Rolling Mill Plant & Cost. Pls. Your email address & contact no. For required discussion for rolling mill plant & also contact with me at email jetthermindia@gmail.com, mobile no. + 91 9329235363. Thnx Sanjay Choudhary, Jtpl, India.
  • Mohammed Abdullahi said on July 5, 2014
    Planning on start a mini steel company, in my country Nigeria
  • Sanjay Choudhary beginner adviser said on July 5, 2014
    @Mohammad Abdulahi, kindly send your contact detail to following mail I'd. Jetthermindia@gmail.com, Jettherm@hotmail.com. We are consultant,engineer and manufacturer in the field of steel rolling mill/ plant.We will provide you all detail according to your requirement. You may also contact on following mob no's. +919329235363 Thanks

    Jettherm@hotmail.com || Consultant

  • sunil patel said on July 14, 2014
    i want to start my own steel plant in gujarat. i need info. plz contact me in mail id. plz. sunilramjipatel@gmail.com
  • Hit said on August 13, 2014
    we are in planning phase to start steel mill but can you please assist us some machinaries, its costing, what is the basic requirement and how we will get easily etc.. it will be more appreciate for this info. Regards,
  • VIKAS RAMDAS beginner adviser said on August 14, 2014

    Generally the rolling mill equipment are available in second hand and also the new one but the technicality of the object play an vital roll . Vast market of the new and old mill is in Mandi GobindGard Punjab Then You can Attain New Mill From Gajiabad And Noida. The Most Important of the equipment is 1) Furnace 2) Rolling Stands 3) Guide Box 4) Gear Box And Pinion. 5) Motors 6) PLC controll 7) Pinch Roll 8) Shear Machine. The list will contain more than the 100 equipment machine and the supporting equipment. You have to understand the need and the funds available to work upon the mill can be easily establish in 2 crore to 2000 crore according to need and necessity and the availability of funds..

    vikas.ramdas21@gmail.com || Consultant

  • Naresh Kumar Goyal beginner adviser said on August 21, 2014
    @sunil patel, I can assist you for steel plant project @ Gujarat from project stage planning, procurement, erection, commissioning and operation for steel melt shop, rolling mill for any capacity. I may be contacted on below details. Thanks & Regards Naresh Kumar Goyal, +919840865811, naresh121254@yahoo.co.in

    naresh121254@yahoo.co.in || Consultant

  • Naresh Kumar Goyal beginner adviser said on August 22, 2014

    @M.Sheikh999, Dear Sir, I am Naresh Kumar Goyal @ Chennai can give you full advice for putting up a steel rolling mill for TMT Bars and Steel melting shop. My consultancy will include project planning, Procurement, erection, commissioning as well as successful operation also. Regards Naresh Kumar Goyal, +919840865811, naresh121254@yahoo.co.in

    naresh121254@yahoo.co.in || Consultant

  • Naresh Kumar Goyal beginner adviser said on August 22, 2014

    @lawrence, Dear Mr.Lawrence, I am a metallurgical consultant for steel industries @ India can provide full assistance for putting up a steel industries @ Nigeria. Our scope includes from planning to successful operation thereafter. Regards Naresh Kumar Goyal, naresh121254@yahoo.co.in +919840865811

    naresh121254@yahoo.co.in || Consultant

  • Naresh Kumar Goyal beginner adviser said on August 25, 2014
    @faleye ayotunde oladimeji, Dear Sir, Thanks for calling today but we couldn't talk. You can call to my skype id: naresh195493. Thanks, Naresh Kumar Goyal, +919840865811 Skype: naresh195493 naresh121254@yahoo.co.in

    naresh121254@yahoo.co.in || Consultant

  • Abdul basith said on August 27, 2014
    I wish to start a billet manufacturing company in Saudi Arabia, but can u pls assist me about the details like the minimum cost of setting up the factory, machine and the basic requirements. regards
  • Vijayalakshmi said on September 4, 2014
    Hi i would like to start a new steel mill near tirunelveli. pls share the detail of required land, machine and other process steps also total cost estimation. Thanks
  • DHARMESH SUTHAR said on September 19, 2014
    ONLY FOR SERIOUS & DEDICATED PERSON : READY TO PUT MY SWEAT,SOUL & FINANCE TO SET UP STEEL MFG. PLANT IN BHAVNAGAR,GUJARAT. PL. CONTACT AT EARLIEST: EMAIL: dharmesh_js@yahoo.com
  • Naresh Kumar Goyal beginner adviser said on September 20, 2014

    @Hit, Dear Sir, Please provide your contact details to enable me to contact you regarding setting up of new steel mill. Regards, Naresh Kumar Goyal, naresh121254@yahoo.co.in +919840865811 

    naresh121254@yahoo.co.in || Consultant

  • Ebrima Alieu Njie said on September 28, 2014
    looking for the price of a turnkey steel rolling mill of medium capacity. Please advice on the price of:
    a)a new rolling mill
    b)a second hand steel rolling mill on turnkey basis.
    Please note ,rapid response is required. Ebrima
  • sanjay said on October 3, 2014
    this is sanjay singh from rak. i am scrap wholesaler in india & other country .
  • Jajati keshari grahacharya said on October 7, 2014
    Dear sir, I am a mechanical engg i want to open a steel industry in orissa cuttack. How much area & money required for production of chanel, beam, angle, plate. Please contact me on this mobile no._+91 9903087634. E MAIL ID_j.keshari75@gmail.com. Thanks Regards, JAJATI KESHARI GRAHACHARYA
  • manjit singh said on October 15, 2014
    we are mfrs, exporters and consultants of steel rolling mill plants. Contact us at +919878101509
  • Harsha said on October 19, 2014
    Am thinking of starting a steel industry from which steel bars are made i need to know what will be the capital amount required. India(Karnataka)
  • Mizanur Rahman said on October 20, 2014
    I want to know that how can i build a factory for Bangladesh. mizanur rahman, pro.m/s Aishi construction, jamalpur, Bangladesh, mobail. 8801711195292
  • VIKAS RAMDAS beginner adviser said on October 23, 2014

    @Mizanur Rahman, Salam Bhai Jaan, Ap Ko Yadi TMT Ke related Company Dalne hai To Uske lIa ap Ko  1000 mtr sq Ki Jammen chaye aur lagbhag 10 Crore Ke Rakam. With this you will able to set up a rolling mill . If you feel the things are possible I will guide you you can call me anytime 7048482667

    vikas.ramdas21@gmail.com || Consultant

  • AJAY AGARWAL said on October 25, 2014
    yes to start a new rolling mill you need minimum of 7 crore rs for manufacturing machineries and furnace apart from the land.in additional you need rs 10 crore for raw materials rotation. i am telling on basis of 10000 tmt production per month. you will require a land of 250mtrx250 mtr for the project.
  • Muddassir Ali Khan Niazi said on November 5, 2014
    Hi Sir how are you. I want to start business with mini steel mill. please inform me how much area i need for this and what is minimum rough estimate. I want to make it in Pakistan punjab Mianwali Kalabagh.
  • sadanand said on November 11, 2014
    Hi, any one want a set up a new mill can mail us. starting mill is all depends how much ton you want to produce. How much you can invest. power resources where you can set up a mill. and most important skilled technician people can come and stay at site. if you have a old mill you want to increase your mill efficiency and production rate. we have dedication team which includes operation, maintenance, purchase and electrical and automation. pl mail us for further queries sadhaya2000@yahoo.co.in
  • M. Pugazhendi said on November 16, 2014
    My client at Srilanka plans for a 60000tpa TMT bar plant. Kindly advise me on the cost estimate, land & power requirements. Thanks.
  • Devender Singh said on November 17, 2014
    We want that per day 10 mt bars are produced in our factory that's way. We request you to ,please give us all information about this field. with cost, Thanks MOB-:9414771600
  • Naresh Kumar Goyal beginner adviser said on November 19, 2014
    Harsha, Dear Sir/Madam, Please give me either your contact details to enable me to send all details about your project. We can take complete responsibility of greenfield projects since conceptual stage to commissioning and successful operation also. Thanks & Regards Naresh Kumar Goyal INDUSTRIAL SUPPLIES AND SOLUTIONS COMPANY, F-6, No.52/17,Rajabathar Street, Pondy Bazar, T. Nagar, Chennai-600017, Tamil Nadu, INDIA E mail- issc.chennai@gmail.com Mobile: +91-9840865811 Skype: isscindia

    issc.chennai@gmail.com || Steel Mill Adviser

  • hardik patel said on November 27, 2014
    i am looking a rolling mill on rent basis in gujrat, i want to invest 30 lacs.
  • Manoj Thakur said on December 8, 2014
    Sir I want to start a mini steel mill in mathura , India .... So I want to know that how much investment is needed .... And how to star it each and every knowledge related to it
  • sanjay choudhary said on December 10, 2014
    @M. Pugazhendi, We are need your email address and contact details regarding as per your requirement Srilanka plans for a 60000tpa TMT bar plant design & Drawing and cost estimate, land & power requirements. Thanks. Sanjay Choudhary +9193292 35363, email: jetthermindia@gmail.com
  • GUD EXPLORE said on December 13, 2014
    ABLE EXPERTISE SOLUTIONS AVAILABLE FOR FEASIBILITY REPORT PROJECT REPORT AND GUIDANCE AS WELL IDENTIFY SUPPLIERS. FROM STARTING TO COMMISSION AND RUN THE FACTORY OF MINI STEEL PLANT TMT OR STRUCTURALS. DO MAIL TO gudexplore@gmail.com
  • Thanigaivel beginner adviser said on December 15, 2014
    hi friends, I have small re-rolling mill in kanchipuram, tamilnadu, india with a capacity of 200 tons per month. I need a favour that, if any body interested to come up for conversion basis, it will be great helpful for me. it will be good business for both, please contact me : ttv1975@gmail.com

    ttv1975@gmail.com || Steel Manufacturing Consultant

  • Thanigaivel beginner adviser said on December 15, 2014

    @Balakrishna Reddy, please let me know the availability of mill fr sale near chennai area. i am very much interested to buy with the cost of 1cr. please contact me: ttv1975@gmail.com

    ttv1975@gmail.com || Steel Manufacturing Consultant

  • Thanigaivel beginner adviser said on December 15, 2014

    @sanjay, can you supply 200 mt per month on sale basis or conversion basis ( 6mm rebar, square & flat). plant is located in kanchipuram, near chennai. contact me: ttv1975@gmail.com

    ttv1975@gmail.com || Steel Manufacturing Consultant

  • Thanigaivel beginner adviser said on December 15, 2014

    @Naresh Kumar Goyal, can you arrange for conversion of 200mt per month. rolling scrap to 6mm rebar, square & flat. contact me: ttv1975@gmail.com

    ttv1975@gmail.com || Steel Manufacturing Consultant

  • shubham gupta said on December 17, 2014
    I have to start mini steel industry for manufacturing iron bars my postal address is mirzapur -231001,uttarpradesh india
  • abhilash chandra beginner adviser said on January 2, 2015
    any one requiring technical, non technical assistance for steel rolling mills can contact us lakshmiconsultancy2010@gmail.com. we are a group of engineers and labour contractors for steel rolling mills

    Ph: 09994787782
    lakshmiconsultancy2010@gmail.com
    Steel Mill Consultant

  • CHANDAN SINGH said on January 15, 2015
    Hello sir I'm chandan singh forman I wants job now i'm Uganda dut. I want to cheng I have 14 years experience My fast time working in forman in 2009 on Dinabandhu steel jajpur katak my no on India. 9883989804/9804465556 and Uganda +256753743230
  • Gagan beginner adviser said on January 16, 2015

    @Abdul basith, Hello Sir, please let us know the details of your requirement so that we can offer you our prices for the melting furnace and continuous casting machines. regards, Gagan Grewal, Rmt Tools India

    Consultant || gagan@rmttools.com

  • Ali said on January 24, 2015
    Dear Sir, I intend to start a mini steel Mill in Pakistan. I am planning to produce Steel Bars and plates . Please guide me how much investment i require and please guide me from the beginning level to start and what raw material i have to use other than scrap or if i require the particular grade than how can i get that grade with mix scrap. Thanks and regards, Ali
  • Gagan beginner adviser said on January 27, 2015

    @Ali, Hello Sir please send me your requirement details on my email address (gagan@rmttools.com) Let me know your proposed production capacity, sizes you want to manufacture. i will wait for your prompt response then we will submit you the prices. thank you. Gagan grewal (gagan@rmttools.com) 00919988571006

    Consultant || gagan@rmttools.com

  • martin said on February 11, 2015
    dear sir, we are looking for 2 rolling mills
    1. capacity 30 ton/hour rebar mill from 8-32 mm
    2. capacity 50 ton/hour rebar mill from 8-32 mm
    please send quote
  • Sanjay Choudhary said on February 13, 2015
    @MR.Martin, We are provide trunkey solution in the field of steel making with world class Technology. We are need your email address and contact details regarding as per your requirement of 50th & 30TPH for TMT Bar & Wire rod steel plant design & Drawing and cost estimate, land & power requirements. Thanks. Sanjay Choudhary +9193292 35363, email: jettherm@gmail.com
  • Parminder said on February 16, 2015
    I want to start mini steel manufacturing mill from scrap. Plz send me details of machines and cost to set up in Punjab.
  • ashfaque sayyed khawaja said on February 17, 2015
    i am looking to start TMT Bar mill in ahmednager maharastra india. i like to have rough estimation. how much cost.1 mt/day, and where all machine and plant cost and where we get all machine .
  • kishor said on February 28, 2015
    gujrat india. i have to start tmt manufacturing plant by direct billet rolling. so, give me total coast of plant. out put of tmt is 10 tpd(tonne per day)
  • Mohd azher said on April 1, 2015
    To set up an mini steel plant give the required information
  • Aiswaran Devaraj said on April 7, 2015
    Is there anyway I can have the better insight of how to startup the mill with the specifications and criteria listed by the TamilNadu government or the basic government policy under which the mill can be made to run and the basic funding required to start up a mini mill which produces 5000 tons per year?
  • imtiaz said on April 11, 2015
    hi i am from pakistan. and intrested in mini steel mills . how much estimated cost is required for this?
  • martin said on April 18, 2015
    @Sanjay Choudhary ...... Jettherm, As per requirement it shows you are not interested in this plant. If interested pls send quote on 30 tph and 50 tph mill of rebar mill 8-32 mm. Martin, Martin.rack@hotmail.com
  • Priyantha Ekanayaka said on April 20, 2015
    I am Priyantha Ekanayaka from Sri Lanka and planning to start a steel industry like rolling as well as melting mill. presently I am having lands as well as other requirements. Anybody who having experience in steel industry and like to be a partner to me please welcome. My contact details. Name. Priyantha Ekanayaka, Mobile.94772767294 email.empriyantha@gmail.com or priyantha@avcoceptltd.com
  • Liu Jiang Ping said on April 22, 2015
    We are a big steel mill owners in China, manufacturing bulk quantity of steel pipes and other allied materials. We want to sell the mill. If you are a buyer or have a prospective buyer, you can contact us through. jing.cheng35@gmail.com
  • altgarih said on May 3, 2015
    We are planning to invest in steel rolling mill. We want to start steel industry anything that can possible be steel industry. Any Cooperation or Joint Ventures are welcome With with profit is very high. Email altgarih@gmail.com
  • Pankaj Joshi said on May 22, 2015
    please send me estimated cost data related to setup steel plant in the detroit city of India PITHAMPUR, Dhar(M.P.)
  • SUNDER SINGH said on May 23, 2015
    Sir myself sunder singh, I am having steel plant experience, now I want to set up one smallest capacity tmt rolling mill in rajasthan. Any body can tell me how much cost req. For this project. plz send me project details on my email id sunder_shaki2008@yahoo.co.in
  • Joana said on June 4, 2015
    We supply copper mould tube for CCM with very good price. Pls contact me if you have any need. atwillco@163.com
  • Joana said on July 2, 2015
    We supply copper mould tube, mill rolls for steel mill, pls contact me if you have any need.
  • ABANI KUMAR DASH beginner adviser said on July 6, 2015
    dear sir, I have running condition rolling mill and also have running condition induction furnace. if any body interested please call me , abani kumar dash, +919437022209

    9437022209
    abani_1971@yahoo.co.in

  • ABANI KUMAR DASH beginner adviser said on July 6, 2015
    10 ton induction furnace with complete set less then 80 lakhs lakhs , please contact me at earliest. plant at cuttack, odisha, india . sale as early possible.+919437022209

    9437022209
    abani_1971@yahoo.co.in

  • sandip said on July 18, 2015
    hello sir i don't know how much money required for steel mill please give me detail about steel mill and how to start
  • jaidi saha said on August 1, 2015
    We are traders and commission agent and Adviser for setting up all type rolling Mill melting furnace. we can provide used plant and machinery used or new witham power and technical assistance. to work hard and keep the cost low and generate the maximum profit of our policy. please contact us.09760388894;jaidisaha@gmail.com . Muzaffar nagar uttar pardesh India
  • Rohit said on August 22, 2015
    Hey, I want to start a steel mill in Gwalior. Please let me know the cost of setting up a steel mill which can produce 5000 tons of steel bars in a month.
  • Naresh Kumar Goyal beginner adviser said on August 25, 2015
    Dear @Rohit Ji, We can offer you complete services from conceptualization to successful operation of steel melting shop and rolling mill plant. For further details we need your mail in detail. Thanks & Regards, Naresh Kumar Goyal, INDUSTRIAL SUPPLIES AND SOLUTIONS COMPANY, E mail- issc.chennai@gmail.com, Mobile: +91-9840865811; Skype: isscindia

    issc.chennai@gmail.com || Steel Mill Adviser

  • joshua willie said on August 27, 2015
    I require STEEL MILLS, HOT ROLLING MILLS, PLATE MILLS AND TUBE WELDING. Nairobi, Kenya
  • mohammad azhar said on September 2, 2015
    hi I am mohammad azhar I wanna start steel mill in kashmir srinagar. how much land or cost required for it and what type of machinery required.
  • waseem said on September 13, 2015
    Hey i want to start mini steel mill in kuwait . Can you tell me how much average investment is required?
  • Yuri said on September 17, 2015
    Gentlemen, a company based in Moscow Russia is ready to cooperate with you in custom design, manufacturing and assembly of a specific hot rolling mini mill per customers specs. The cycle will take about 6 months. We deliver worldwide! Thank you
  • Chandan singh said on September 21, 2015
    hi i am Chandan singh foreman now start contact basis work. my fist contact ashok steel in nepal sir i am supply all tip lebars on rolling mill like this townsman, technician, fitter helper non technician etc so please give mi to one chance on your plant my no +91 9804465556/+977 9807241902
  • Devendra Pandey said on September 27, 2015
    @Joshua willie, we can supply of all kind your required steel plant machinery and completely Drawing design engineering of steel manufacturing latest technology. Pls. Contact me Devendra Pandey (Steel Project EPC consultant and Exporter) my mobile no. +91 7389901122 and email: jettherm@Hotmail.com. Thanks, we are waiting your prompt reply.
  • Devendra Pandey said on September 29, 2015
    we are working on rolling mill consultancy engineering of steel manufacturing latest technology in india and also abroad. pls contact me if any inquiry. Devendra Pandey (Steel Project EPC consultan and Exporter) my mobile no. +91 7389901122 and email: jettherm@Hotmail.com Thanks, we are waiting your prompt reply.
  • Ankitagrawal said on October 2, 2015
    Sir I am planning for opening a steel mill please tell me the rough estimate of investment in it thank you!
  • sandeep said on October 22, 2015
    I am interested in this business . I am having as a capital amount around 3 crores but there is one problem in cheenai I m from up so I cant get contract if there is any one who find the contract work related to steel products then I will start the my work in sriperumbudur . contact number is 7094767892
  • Rajeev said on October 27, 2015
    I am rajeev from jharkhand, completed mechanical engineering and I want to start a steel mill, could u please help me out, how I can start it.
  • abhilash chandra beginner adviser said on October 31, 2015
    Good condition rolling mill for sale.Full set with crane.No shed. Plenty of spares. Excellent condition. Please contact 9496663652

    Ph: 09994787782
    lakshmiconsultancy2010@gmail.com
    Steel Mill Consultant

  • Deme said on November 1, 2015
    i'm looking at setting up a steel mill factory in nigeria. i already have two acres of land i will like to know what it will take. as in;
    1. space
    2. equipment, types of workers
    3. cash involved and so on
    please i will need details as soon as possible. thanks
  • pet said on November 5, 2015
    sir am interested in opening a steel mill factory, am a fresh industrial and production engineering graduate with a little capital to start up please sir how much do i need to start up the still mill manufacturing in a country like nigeria. i don't mind if am assisted in other area of the still mill
  • collins owhe said on November 25, 2015
    I want to start a 3000mt monthly capacity tmt bar \ building rods steel mill at Buachi state Nigeria please can you give me approximate estimation for plant installation with supply of all machinery please.
  • fadrul zaman said on November 30, 2015
    Hi i am zaman am looking put a TMT bar manufacturing unit for that i need estimation of total factory and i need were should i need to purchase machinery and also making process and too raw materials.
  • salman khan said on December 7, 2015
    I am looking to start a mini steel mill in india asansol (west bangal) . i like to have rough estimation. how much cost.
  • Rajan John said on January 17, 2016
    I want to start a steel rolling mill to make angles in Ahmadabad, Gujarat, India. Want to know what is estimated cost?
  • Priya Sharma said on February 19, 2016
    Is small mini mills of 6"/8" capacity. Viable. if so suggest best product range for manufacturing also cost of plant and machinery for setting up such micro mills near Pune. we are holding sufficient MIDC land required for setting up such mills In D zone area. Need financial support/Investor for plant and machinery and working capital. please update suitably Reg priya sharma steelalliance17@gmail.com
  • sadanand shetty said on February 23, 2016
    Hi,any one want to start their own steel mill.They should know 1.which product they want to produce (e.g wire,rod,TMT rod, sections,pipe,plates etc.) 2. How much capacity want to produce. 3. The most important is finance means how much budget they have. if you have this thing we can suggest you.for each and every aspect of steel mill. feel free contact us sadhaya2000@yahoo.co.in
  • Mervilla said on February 25, 2016
    Hi,I would like to have steel mill plant in the Philippines. Can anybody tell me the manpower I needed? Thanks
  • francis ndah said on April 19, 2016
    I from Nigeria I saw your post on the web, frankly I am interested in starting a small TMT bar mill in my country. Please give me the estimate of the cost of obtaining the plant. Thanks.
  • Steel Melt Industries said on April 22, 2016
    We are manufacturers and consultants for Steel Billet casters and Steel Plants. You can visit our website www.steelmelt.in or email us at steelmeltindustries@gmail.com
  • FRED FOUNDER said on April 26, 2016
    How much in capital can it cost me to start a simple steel plant.
  • kaviarasu said on May 6, 2016
    now i am only the age 20 and i am studying electrical engineering and I want to start steel mill in Pondicherry around that place . so i want to know how much cost that i need to prepare for the initial price ,i have the money to start my business but i need a guideline so please share some information about a steel plants to start in my place quickly and tell me where should i get license and space requirement ,environments, labours, engineers that how much i need
  • Shaik Ejaz Ahamed said on June 17, 2016
    Hi, I am form kurnool, Andhra Pradesh. I want to start manufacturing of TMT bars from billets, and capacity of 25 TPD, I want to now, how much the plant cost to me.
  • avinash said on July 21, 2016
    i will decide plan to opening steel factory .. how much investment in factory.. i am Avinash from Nagpur
  • SRIKUMAR CHAKRABORTY beginner adviser said on August 16, 2016
    Myself Srikumar Chakraborty, in a group, assisting mini steel plant mostly in capacity of MSME making alloy & special steel as consultant for improving quality, productivity optimizing product cost, process/ product development. To me i.e. from our long experience, we feel to set up mini steel plant for making alloy & special steel the best option will be installation of IF ranging 10-15T capacity with machable vacuum degassing unit when production will be expected as 30,000T to 45,000T ( considering 10 heats/day in total 300 working days), setting up a billet caster for casting 125/140 RCS for re-rolling of alloy steel and balance critical grades like tool steel, AISI 4130/40,4340,En25, DB5/6 forging. Hope nearness to auto industry, power sector and engineering industries will give satisfactory dividend for further expansion/modernization and will bring happiness and peace in the organisation. Site selection, marketing potential and consuming sectors are to be examined seriously. Best Wishes

    Mini Steel Plant Consultant

  • Haris hakim said on August 27, 2016
    I want to start a mini steel plant in maharashtra india. Can any one suggest me how to start that business and estimated initial investment for new business. Plz suggest me.

Your Comment

(All the above fields are required.)

Categories

Popular Articles

Join Our Newsletter