STARTUPBIZHUB

“Starting a Plastic Manufacturing Plant”
Comment Page 2

  • Sanjay said on July 17, 2011
    Dear sir, I want to start my own business in manufacturing of specialty plastic on home basis production. So, you are requested to give me your valuable suggestions as well as guidelines.
  • panthal said on July 17, 2011
    I am planning to start production of pvc electrical conduit fittings with one or two injection moulding machines. Qualified and Experienced Consultants in this filed, machinery suppliers may pls contact me for necessary guidance on payment basis.
  • Mohan Agarwal said on July 17, 2011
    i want to set up disposal plastic glass and cup manufacturing unit in durgapur,dist-burdwan,west bengal,india, i have 1 acre land and i can initially spent 15-20 lakhs.But I don't have any idea of this business. If you kindly inform me regarding this then I will be very thankful to you please help me regarding this. its very urgent.
  • rajan paul said on July 19, 2011
    dear sir i want to start my own in plastic items likes disposal glass, cup, carry bag, .so please give me some tips and about the costing to start it thanks
  • Vinod Nair said on July 19, 2011
    Sir, I want to start Plastic molded parts or Rubber molded parts factory in small scale, so pls. give me information about required machines and its cost. I live in Jalgaon district in maharashtra.
  • vinal said on July 19, 2011
    i want to set up disposal plastic glass and cup manufacturing unit in Raigarh, Chattisgragh , India I don't have any idea of this business. If you kindly inform me regarding this then I will be very thankful to you please help me regarding this. its very urgent.
  • Mrs.Sandana Francis said on July 20, 2011
    i want to start manufacturing unit, my father has a place in Bangalore with small scale power supply with plastic molding machine, cutting etc. he was using the same for make furniture and wooden work. which is lying idol i want to do something with this. please give some ideas where i can do some thing with the available source.
  • Nisar said on July 22, 2011
    Sir, I am a Software engineer and I would like to start a small plastic manufacturing unit near chennai. Below are my Queries:
    1. Where we will get the information about the home bases product and cups and Process for Manufacturing carry bags.
    2. What will be the initial Planning cost to setup a plant .
    3. Do we get any support from Govt or training from Govt Organizations in tamilnadu or anywhere in India.
    4. where we will get the information about marketing channels.
    5. any training classes in chennai.
    So, you are requested to give me your valuable suggestions as well as guidelines.
  • Avesh jain said on July 25, 2011
    Hi, I am based in jhanshi, (U.P.) and I would like to get into plastic want to start a plastic manufacturing unit disposal cup round at U.P.. pls help me to find out the machinery requires, raw material requires and the minimum investment. thanking u.
  • Ubon Stanislaus said on July 25, 2011
    Hello, I stay in Uyo , Akwa Ibom State in Nigeria, kindly direct me on how to set up Plastic Industry here in Nigeria. Machines involved and probably with prices together with raw materials and how to get them.
  • Rrajeev Sharma said on August 2, 2011
    I want to start a small/medium scale PET Bottle manufacturing unit. The location is close to a Petroleum Refinery in UP. Please advice me on the type of machines that I should buy. Also, I request you to assist me with the Project Plan.
  • UMESWAR MOHANTA said on August 4, 2011
    Hello Sir/ Madam. I want to start a plastic manufacturing plant in orissa. I'm interested in plastic chairs, bottles, mugs and jugs .For this
    1. What skill will I need to run this business
    2. What sort of capital is needed for the machines and the overall set up of the business
    3. How profitable is it ?
    Thank you and looking forward to your response
  • vinod patil said on August 6, 2011
    i have own manufacturing company of heavy fabrication ,we built special purpose machines . i establish one more company but i want to do something different from my regular items ,i am interested in plastic industrial items .so pls suggest how is market ? how much investment ?
  • SAM said on August 6, 2011
    hello dear sir !My name is Sam from uzbekistan. I wanted to open plastic bag making factory and I need your help please advice me how to start my first move ! how much money do i need for it !please I wait your respond !
  • Ravi said on August 8, 2011
    Hello sir/madam i am starting upvc electric fitting pipe kindly help me about machine, technical know how. i want to start in delhi ncr also tell me about how much initial investment
  • Chiranjib Deka said on August 9, 2011
    Dear Sir, I Mr.Chiranjib Deka, from Assam want to set a plastic based industry in our newly set up plastic park. I want a industry which should based on daily used product with a minimum investment.
  • Subhamoy Sanyal said on August 9, 2011
    Dear Sir/Madam, I want to set up a commercial(civil construction based)pvc pipe manufacturing factory in Kolkata, West Bengal. I would like to know the initial investments and other important information regarding the same.
  • Madhav said on August 11, 2011
    Hello, i would like to setup an Biodegradable plastic bag manufacturing unit, may i know in india who are the consultants or who are the vendors who can provide me service in setting up an plant. what will be approximate investment for this project. please consider it at most important and revert with all the details at the earliest. Thank you, Best regards, madhav
  • davidraaz9773 said on August 12, 2011
    hi, i would like setup a disposable syringe manufacturing unit in warangal , india. what will be the investment for this project.
  • siddharth said on August 12, 2011
    Hi I want to start my own business in plastic molding, I'm a software engineer working with private firm so could you please guide me in detail about project set price, pre-req, market etc. thanks
  • mona said on August 14, 2011
    i would like to set u a plastic molding business to manufacture disposable plates, cups and glasses and also the door mats. i have a good friend of mind who is a polymer professional. i am from jorhat assam. please suggest me how can i start the business and from where i can get the raw material and the molding set up equipments. what will be the investment in this business.
  • SVR said on August 15, 2011
    Hello, i am from hyderabad,i want to start cotton carry bag production unit. please email me initial investment for machine and profit scale in this business
  • JAGAJIT SINGH said on August 16, 2011
    Hi, I am Jagajit Singh from kolkata (west Bengal) I want to start a plastic molding unit for plastics granules as well as master batch pls assist me regarding the investment and all other kinds. Regards JAGAJIT SINGH CELL : 9831065118
  • Rajesh said on August 16, 2011
    Dear Sir/Madam, we would like to open Plastic Injection Moulding unit in Pondicherry, please advice how much we need to invest initial & etc Regards Rajesh 7598472802 srnsay@gmail.com
  • ankush dandyan said on August 18, 2011
    Dear sir, i want to start my career in packaging production of plastic give me any idea for what type of plant i established in which sales problem are not interrupt me and income will be high. i am living in kurukshetra haryana my cell no is 09896835655.
  • Devraj Yadav said on August 18, 2011
    Dear sir, i am from Gurgaon. i want to start business of plastic injection moulding manufacturing plant for plastics auto components. Pls suggest me that which size machine should be installed in starting and what will be the cost of the same machine and also tell me which size of machine can produce how many units of production. and sir, i will work for automobile company original manufacturer for this pls tell me how to calculate production cost of moulded products. i am waiting for your precious suggestions.
  • mohammed Al-Abdulla said on August 19, 2011
    who is interested in starting a plastic factory in Qatar, for producing FIBC jumbo bags and thermoplastic products. I will have 7500 square meter land and all permits. Looking for a J/V or a partner who has a long experience in plastic factories.
  • A S OMMPRAKASH said on August 22, 2011
    dear sir ! i am ommprakash from bhubaneswar, orissa. i want to start my own plastic bottle manufacturing industry. will u please help me by providing necessary ideas and information about this?
  • Anil said on August 25, 2011
    Respected Sir, My self Anil Ahuja From Vapi, Gujrat, India. I want want to Start A Plastic injection Moulding Business within the budget of 50 Lacs, I Want to do Jobwork as well as Mfg For Plastic chairs as well as Other Household Items, Request your Advise For How To Start Business, Machinery Details for Chair and Household Injection Moulding,Required Manpower and other necessary details.
  • rohit swami said on August 25, 2011
    Dear Sir, i am from badalapur thane.i have above eleven years exp. in plastic machine,mold and plastic processing. i want to start the business in machine manufacturing or production of molded part.i am waiting for your precious suggestions. rohit swami
  • Siddharth Memane said on August 26, 2011
    Hello sir ,I live in pune,I want to start plastic pod manufacturing plant. plz send me machine cost and provider, its capacity, labour requirement,plastic providers,etc.
  • bangariah sharma said on August 26, 2011
    Sir I am Bangariah sharma, a free lancer. Recently received a big order to supply bio degradable carry bags which has cloth feel. I request you to kindly guide me on who are the manufacturers of these bags. Also I am interested to manufacture them, request to kindly provide the necessary guidance on project report, technical know how, etc.. Thanking You, Bangariah Mobile Number:-93 92 47 98 99. Location :- Hyderabad
  • Anoop said on August 27, 2011
    Dear Sir Please advise me from the very first and basic requirements to start up a new PET Preform factory in Kuwait. We are looking in to startup factory in Kuwait and looking for Middle East Market. Equate - the Polypropaline Plant is here producing all kind of raw materials Please advise on required Capital, Details of Machinaries, Suppliers, Requirements for Factory Setup, Raw Materials, Thanks & Regards Anoop
  • Poyyamozhi G said on August 27, 2011
    Dear sir, i want to start an injection moulding unit in Chennai tamilnadu. so i need project report samples & needs to start an manufacturing unit from top to bottom. thanks & regards poyyamozhi G
  • skander wesleti said on August 28, 2011
    dear sir, I have the idea of ​​a proposed plastic bag manufacturing and packaging in rolls, my creation will soon be a tunis, I want to know the price of this machine and different production lines and the terms of reference , thank you for sending me the quote for this machine and hopefully the least expensive, thank you to answer as soon as possible and get me the brand of machine and contact suppliers. and thank you S.W
  • kinjal said on August 29, 2011
    sir i fresher MBA & i want to starting a small business instead of job.......but i have no idea for new demand .....therefore you suggest me for which kind of plastic business to start .......i do anything for business there for kindly suggest me.
  • vivek upadhyay said on August 31, 2011
    i'm vivek upadhyay firozabad in up i want syringe manufacturing plant so plz give me some tips
  • Rajiv said on August 31, 2011
    I am rajiv from Mumbai,I am keenly interested to start my own business for making of ball Pens (use and Throw Type). But, I have no idea about the demand of the products in the market & which is necessary license are required for starting the Plant, what will be the cost of entire projects. Sir, your earliest advice on this regards will be highly appreciated and oblige.
  • harshad said on August 31, 2011
    I have to set plastic molding factory at aurangabad, Maharshtra. But I am totally aware of govt. legal licensed requirements and rest all of things. can you send me some description about govt. loan processor in setting this unit. Please explain me all those things required to set plastic molding factory from basic. I have my own land to set factory. My cell no. is .
  • Obi Charles said on September 1, 2011
    Dear Sir, I most thank you for your help on this site. My name is Charles from Isolo, Lagos Nigeria.Please, I want to set up a blown film extrusion plant(polyethylene film). right now i need to understand the various production process, from start(use of resins) to the finished product(nylon). the different stages of the plant set up, their functions (parameters used for production process),specifications(models ) and hazardous effects as well as safety measure(s) to be applied.the estimation cost of each unit machine is required. Installation process as will be required. Kind of raw materials required.flow chat diagram of the production process and factory set up.the different manpower as required for different unit of the plant. Please accept my thanks for your most anticipated respnose to the above requests. Thanks and regards Charles Obi
  • rohit mishra said on September 2, 2011
    HELLO sir, pleas tell me the initial investment.....to set up small injection manufacturing plant, i m from rewa, madhya pradesh, india, and all about production
  • Ramesh Kumar Ahuja said on September 3, 2011
    Sir, I am a CA and want to go for an Injection Moulding plant with some relative as a partner with 50% share in investment and profits. We are confident of getting orders for Maruti Car Components and as such are planning to set up our Unit in Manesar, Haryana. Can we start with 50L as initial investment by installing 4 computerised Machines of 100 tonnes each. Also, advise the source and make of machines to be acquired with estimated price thereof. Thanks
  • Jignesh Suthar said on September 4, 2011
    Hi, I want to start new business. I have done all the calculation according to report I am getting good profit but when I ask in the market about the product every body say very less profit margin. So I want to discuss with you can you please contact me.
  • Murari Sharma said on September 7, 2011
    i m from munger , bihar to know that how can i start a poly bags manufacturing factory( all type bags ) in my city. so plz send me all details abt that business like investment,registration & profit . tnx
  • sseruwagi said on September 9, 2011
    i would like to startup a plastic bottle manufacturing company in Uganda. please what are the requirements for the kick start.
  • A. K. Udgiri said on September 11, 2011
    Hi, I want to start a new business of molded chairs and furniture and i want to know the project cost for that unit with their project cost.so plz send me all details abt that business like manufacturing process,investment,registration & profit etc.
  • Simon Phang said on September 13, 2011
    Dear Sir, I'm from Guangzhou, China. I want to start a business to produce PP prefilled syringes, which is sterile and will be supplied to pharmaceutical factories. I would like to know project details such as factory layout, process design, and equipment etc. Thanks a lot.
  • mukhtar said on September 13, 2011
    Dear Sir, i am from karnataka i want to start a recycling of rubber plant . the rubber which is using in fixing the auto glass and others . So the machines and the process and detail about it including budget .
  • keshab khadka said on September 14, 2011
    sir, i need complete information for disposable plastic cups, bowls, plate and food box which can use restaurant to pack foods that uses PP and PVC as raw material. I live in kathmandu, Nepal. So, please, I don't have any idea about machine cost, running capital and raw material. Waiting for your reply. Thanks.
  • talha aziz said on September 15, 2011
    Dear sir, i want to start a business of soft drinking bottles.but sir problem is that i have no idea of this business. first i start this business at home made level. so sir i want your help regarding this problem. pls tell me in detail the process of making bottles? thank u
  • Arun said on September 16, 2011
    Hi, I am from Orissa and I would like to get into plastic want to start a plastic manufacturing unit disposal cup round at orissa .. pls help me to find out the machinery requires, raw material requires and the minimum investment. thanking u.
  • arun said on September 18, 2011
    hello sir, i want to start a company that produce 200ltr plastic drums using blow moulding techniques. please help me to find out the required machinaries, raw materials ,legal problems and it's starting cost
  • Tripurari said on September 20, 2011
    I am tripurari.i have experience of one year in injection moulding on the post of J.E. Sir i want to start a business in injection moulding m/c. I will invest 50 lacks and 2 acres land. So sir plz help me about it. 08793295140
  • amit kochar said on September 22, 2011
    sir, i want to start plastic factory in chattisgarh, please give detail regarding costing of setting up it. m having 1000000rs to invest n rest thru loan
  • Paul Christopher said on September 22, 2011
    I am from Vellore Tamil Nadu..Proposing to start a plastic Injection moulding shop. Have experience of around 18 yrs. in the same field.. Would like to know how to make a feasible project for a machine of 500 tons
  • Harish Singh said on September 23, 2011
    Hello All, We are into plastic industry from last 8 years and having Factories in 02 locations and now we are looking for young and dynamic entrepreneur to scale up the current business. Investment is no bar to find out new opportunities and possibilities. Please feel free to contact, if having any good strategic business expansion plan. Contact – info@singhplastic.com, singhplastic@gmail.com
  • muktikanta said on September 23, 2011
    dear, sir i'm from orissa want to start a small industries in plastics recycling material , so suggest me about machine and how to start plant.
  • asif zulfiqar said on September 26, 2011
    Sir i belong to Pakistan and MBA degree holder. I want to be a businessman and interested in plastic pipe industry. I am not aware about it. Please guide me about its cost? and process of starting it? Thanks
  • Tapash said on September 27, 2011
    Sir i stay in kolkata India and am interested in the Plastic manufacturing unit. Kindly send me as much information as possible regarding the start-up costs,terms, raw materials, machinery, etc
  • Agha Khurram said on September 27, 2011
    Dear, We are currently in the business of manufacturing of textiles. We would like set up plant in Saudia Arabia for manufacturing of water bottles upto 3.5L. Can you please advise feasibility for this kind of set up and its cost step wise in terms of price and machinery. Thank you
  • santosh kumar c said on September 28, 2011
    dear, sir i am from hyderabad want to start small industries plastic bottles cap manufacturing pls. Suggest me about machine price and how to start a plant. Thanks
  • Abhijeet borah said on September 29, 2011
    Dear sir, i want to start a plant of making disposable glasses & dishes of various sizes at very low investment, and i want to know the cost of the machinery which has to be very low price and also tell me about raw materials where i get in guwahati and other states, sir suggest me about these. Dist- sonitpur, state- Assam, p.o- Biswanath chariali, pin- 784176
  • vishwa said on October 1, 2011
    i am vishwa and i am living in mumbai right now, i want to start a plastic manufacturing company in m.p. i like to know what should be the cost of starting and where can i get the machinery and raw material
  • arihant jain said on October 2, 2011
    hi arihant my name is midlands plastic ltd and i have experience of eight years running plastic business for someone also in uk with safe manner and with the good profit. i think i can fulfill your requirements. i would like to know who is going to supply you preform for the bottle because preforn is manufacture in different machine then it pre heat and blown in to different machine therefore budget will be very high i do not have an idea that what exactly you are going to make only bottle ( size (100ml......1000ml) or both preform and bottle .please reply me if you want to go ahead i can travel to your place and give appropriate advice about suitable location ,unit size and international market.
  • sushil lalwani said on October 6, 2011
    hi i am Sushil, i want to start the a disposable plastic (pp) glass, bowl, spoon, plate manufacturing company in U.P. i want to know that what will be the cost of starting and where can i get the machinery and raw material.
  • Mathai said on October 6, 2011
    Sir, I would like to start a candle making and soap Powder making unit. What will be the minimum capital required. I want to start with branding. Please help me so that you shall be appreciated. Regards Mathai
  • Rakesh Agarwal said on October 7, 2011
    Respected sir, i want to start the small plastic industry...i want to make only different types of water bottles..i am from siliguri west bengal..so what are the procedure and cost of total plant?and cost of the machine set separately to know the price only...please sir help me.. thanking you rakesh.
  • Harish said on October 9, 2011
    I would like to establish a complete project of UPVC, PVC and fittings and other related products in one of the african country, please let me know how to start with. As I have ready market for these products.
  • Vijay said on October 10, 2011
    Hi i want to start plastic product business in small scale for home related product please let me know details for that business i can invest 5lac
  • Anand said on October 13, 2011
    Sir, i want to start a plastic manufacturing unit out of scrap plastic. Can you guide me regarding what type of product can i manufacture, what type of machinery will be required. I plan to set up the unit in Bihar, my investment will be around 10-15 lacs.
  • Franklin Babu said on October 13, 2011
    Sir , we want to get a Project report in detailed format. to start a drip irrigation systems & pipes industry, kindly guide us to learn more about machinery and suitable systems . thanking you for this favor.
  • VIVEK said on October 14, 2011
    Hi, I want to set up a Plastic manufacturing unit for daily use Household and commodity Items. what type of machinery will be required and from where i can source the Machinery as well as Molds. I plan to set up the unit in West Bengal, near Kolkata, pl. also know me the initial Investment required, other then Land cost. Best Regards - Vivek
  • Gracelyne said on October 22, 2011
    Sir, I want to setup a recyclable plastic bag manufacturing plant. Could you tell me how much i would need to invest and where to procure machinery from? I would be highly grateful if you could help. thanks!
  • RAMESH RAMALA said on October 24, 2011
    Sir, I am working in an MNC company Hyderabad. But I want to be an entrepreneur & I am interested to start the career with PVC pipe manufacturing industry. I am planning on the same, guide me reg the initial investments to be done & financial risks in the business.
  • Sagar said on October 24, 2011
    Sir, I am an MBA fresher,from Raipur, Chattisgarh state..the state booming in overall aspects led by great business industries,around which i have a plan for establishing business of manufacturing new generation designer bags for multipurpose, may be for shopping or carriage etc. I am seeking for proper guidance over the investment, trend to be followed, n its manufacturing requirements, please provide me the required helpful information for the same, if any of you reading this, could help me up as well..Through Mail, Thanks!
  • Peju said on October 24, 2011
    I am planning on starting a plastic making business in Nigeria and would love to know what equipments and machines would be necessary to start, if you can give me a feasibility study of what it takes, I will appreciate it. Thank you
  • thuto said on October 24, 2011
    hi am thuto from Botswana in arica. i will like to know the kind of machinery needed for pvc pipe manufacturing and other equipment necessary. thank you
  • Rajesh said on October 26, 2011
    We want to manufacture roto printed laminated film and pouches in India. We are looking for consultant in technical side and marketing of the same. Consultant or employees with experience can contact and suggest
  • Santosh Kumar said on October 29, 2011
    Hello Sir, I want to set up a Plastic manufacturing unit for daily use Household and commodity Items as like chair. furniture, bucket etc item . what type of machinery will be required and from where i can source the Machinery as well as Molds. I plan to set up the unit in U.P.( District Sitapur). and i want to know the project cost for that unit with their project cost. so plz send me all details abt that business like manufacturing process, investment, registration & profit etc.my mobile number is +91 9450952113
  • Amjad said on October 29, 2011
    Dear Sir, i am from Palestine- Jenin City i want to start my plastic injection moulding plant . So the machines and the process and detail about it including budget . an is there any way to do used syringe recycling? thank you
  • ajesh kamble said on October 30, 2011
    i am new in this business. i want to start the business in plastic products. kindly advice me for the same
  • Manoj said on October 31, 2011
    Hi, i am from Tamilnadu Coimbatore and i would like to purchase, pet bottles ie soft drink bottles and drinking water bottles like bisleri and all, if any one can supply plz contact me at my email.
  • N V Padma said on October 31, 2011
    Hi, am from Chennai. I am interested in starting some business on my own. I cant invest much. I am interested in Jute bags, cell phone pouches, plastic toys even small level electronic related business. Pls help.
  • Gautam jain said on October 31, 2011
    Dear sir , i want to start a business of plastic chair manufacturing but dont have knowledge about the machinery cost please let me know location d&nh please let me know the legal procedure and how much investment we need initially
  • Iheanacho Ugwueke said on November 2, 2011
    Dear Sir, I'm Iheanacho, I live in Lagos Nigeria. I want to set up a small plastic Industry in Ikorodu L.G.A of Lagos for the production of Plastic Chairs,Tables,Drums Toys and Jar mold respectively. Sir I need a feasibility study to enable me invest wisely. Thank you. I can equally be reach through the number 08033251195.
  • ambika prasad singh said on November 3, 2011
    dear sir,i am from odisha,balasore, planning to start polymer recycling job costing and investment.
  • Mohammed Riyaz said on November 4, 2011
    Dear Sir, I am planning to set up business in plastic injection moulding in chennai. Please suggest me to whom i have to approach for this kind of business ans also profit analysis for the same. Your earlier response will be highly appreciable. Thank You.
  • ajith said on November 5, 2011
    Dear sir, In Tamil Nadu, India near trichirappalli, we planned and erected the plastic machine for the manufacturing of double color shopping bags. Unfortunately, after taking the trial run - we couldn't move further due to the ban of this product by government. Now the machine is idle. Is any option either to manufacture agriculture purpose pipes or the sell out this. is any source? pls consider. thanks. Ajith
  • Umakant Singh said on November 6, 2011
    Deer Sir, I am engineer in plastics PVC Pipes manufacturing area last 4 years but now i want to start our business with pvc pipe plant only one M/C pipe size DN- 40mm. to 225 plz. tell me about its investment. THANKS,
  • Jerry said on November 6, 2011
    Sir, I like to start PET manufacturing unit in kerala. Initially I like to make bottle by buying preform. slowly I think I can start with both injection and blow molding machine. Sir from where I will get more details about this business ? In india who is the main dealer of this machines ? What is the minimum investment required for this business.
  • amit vilas khaparde said on November 6, 2011
    Dear Sir, I am planning to set up business in plastic injection moulding or Alum ferric or Breaching Powder project factory in Vidarbha (Maharashtra). Please suggest me to whom i have to approach for this kind of business ans also profit analysis for the same. investment amount, Your earlier response will be highly appreciable. Thank You.
  • Akhil. K.S said on November 7, 2011
    Respected Sir, I am Akhil from Ernakulam, Kerala, India. I am new to this field and i would like to start a new business in this field. We are planning to start a manufacturing plant for house hold items like small bottles, buckets, chair etc. We are also interested to know about pvc pipes and other kinds of pipes and its manufacturing.I want to know about requirements, about Machines, money, knowledge, information centers and help centers in kerala and other requirements. I am expecting your valuable advice and knowledge for this. Sir please write to me. Thank you.
  • dean said on November 7, 2011
    Dear Sir, I have 16 years experience in injection molding and would like to start my own business, i have extensive knowledge in all parts of the business except for sales and getting customers. What is your recommendations for this ? please help, Dean. (united states) in southwest VA..
  • mohammed thanzeem said on November 8, 2011
    please give a brief of the power consumption, investment for plastic moulding business to be started in kerala. ernakulam
  • Himanshu Singhal said on November 8, 2011
    I am a salaried person but wants to start a plastic manufacturing unit in Balasore, Orissa, India. I want to know about the initial capital investment, the license required for setting up such business and the number of workers required for running such business. I do have experience in running a business so the above mentioned information will be helpful. Himanshu Singhal
  • raj said on November 9, 2011
    Any one want to start business in chennai. Has good capital more than 15crore investment. can become partner in autoparts moulding unit. good business, good profit and very good ROI. Please email at rbohara@gmail.com.
  • yogesh said on November 10, 2011
    i want to start a disposable & plastic glass manufacturing plant. in gurgaon please tell me how much money & land requirement.
  • santosh kumar Das said on November 11, 2011
    I want to start a plastic glass and plate (disposal)factory. How much cost incur on the same. I want to start in Manesar, Hariyana or Noida, UP. Please help me to find out lay put and other details.
  • yagyesh kesarwani said on November 12, 2011
    Hi, I just want to know what is the profit percentage of plastic industry. Please do reply @ kesarwaniyagyesh@gmail.com
  • piyush jindal said on November 12, 2011
    sir/mam i want to start a new plant about plastic or paper disposal items. like poly bags, bowl, plates, cup, and more..in a very short level can u suggest what can do for this. bcoz my amount is very less and starting cost is very low. can u suggest starting this plant is good for me or not. and i want to start this in my home town bundi(rajasthan), india... and can u suggest which type of i selling this items..

Your Comment

(All the above fields are required.)

Categories

Popular Articles

Join Our Newsletter